Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROCKY MOUNTAIN ERECTORS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROCKY MOUNTAIN ERECTORS, LLC in 9601 E. 63RD ST., RAYTOWN, MO 64133 (NAICS 238120). OSHA activity number 340756485.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rocky Mountain Erectors, LLC — free Get an email when a new federal OSHA severe-injury report for Rocky Mountain Erectors, LLC is published. One employer, no account, unsubscribe in one click.
Site address
9601 E. 63RD ST.
City
RAYTOWN
State
MO
ZIP
64133
Mailing
1499 MANITOU BLVD., COLORADO SPRINGS, CO 80904
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.453 B02 V

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 4, 2015
Abate by
Aug 28, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:   (a) On or about July 1st, 2015, at a construction site located at 9601 E. 63rd Street in Raytown, MO, two employees were observed to be working from a JLG Skytrak aerial lift, over 10 feet above the lower surface, without being tied-off to the boom or basket of the aerial lift.   Abatement certification is required for this Item.  Use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2000

1926.760 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Aug 4, 2015
Abate by
Aug 28, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.760(a)(1):  Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:   (a) On or about July 1st, 2015, at a construction site located at 9601 E. 63rd Street in Raytown, MO, an employee was observed to be standing on the top flange of a structural I-beam, over 15 feet above the lower surface, with no type of fall protection system in place or in use.   Abatement certification is required for this Item.  Use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2800

1926.761 B

Serious Gravity 10 2 instances 2 exposed
Issued
Aug 4, 2015
Abate by
Aug 28, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:   (a) On or about July 1st, 2015, at a construction site located at 9601 E. 63rd Street in Raytown, MO, employees who were exposed to serious fall hazards were performing steel erection work and were not trained in the recognition of fall hazards and the steps required to mitigate those hazards.   Abatement certification is required for this Item.  Use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2800

View Rocky Mountain Erectors, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340756485.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.