Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NEW ENGLAND WIRE PRODUCTS, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of NEW ENGLAND WIRE PRODUCTS, INC in 9 MOHAWK DR, LEOMINSTER, MA 01453 (NAICS 331420). OSHA activity number 340766260.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch NEW England Wire Products, INC — free Get an email when a new federal OSHA severe-injury report for NEW England Wire Products, INC is published. One employer, no account, unsubscribe in one click.
Site address
9 MOHAWK DR
City
LEOMINSTER
State
MA
ZIP
01453
Mailing
PO BOX 276, WESTON, MA 02493
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331420
Employees
100
Ownership type
A

3 citations on file for this inspection.

1910.213 D01

Serious Gravity 10 1 instance 4 exposed
Issued
Sep 18, 2015
Abate by
Sep 24, 2015
Penalty
Initial $7,000 · Current $3,500 Reduced
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  JET, 10 inch table saw, Sample room, 9 Mohawk Drive, Leominster, MA: On or about July 10, 2015 the Jet, 10 inch table saw employees were using saw to trim templates and cut dado's was not guarded by an automatically adjusting hood exposing which exposed employees to amputation hazards.  Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
  • — I (S) $3500
  • — Z (S) $7000

1910.212 A01

Repeat Gravity 5 1 instance 4 exposed
Issued
Sep 18, 2015
Abate by
Sep 24, 2015
Penalty
Initial $27,500 · Current $13,750 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Drill Press, Sample maker shop, 9 Mohawk Drive, Leominster, MA: One or more methods of machine guarding was not provided on the drill press used to make weld tip holes in plywood sample templates.   The New England Wire Products, Inc. was previously cited for a violation of this occupational safety and health standard 1910.212(a)(1), which was contained in OSHA inspection number 956153, citation number 4, item number 1 and was affirmed as a final order on June 4, 2014, with respect to a workplace located at 9 Mohawk Drive, Leominster, MA 01453.
Recent events (2)
  • — I (R) $13750
  • — Z (R) $27500

1904.39 A03

Other-than-serious 1 instance 1 exposed
Issued
Sep 18, 2015
Abate by
Sep 24, 2015
Penalty
Initial $5,000 · Current $2,500 Reduced
29 CFR 1904.39(a)(3):  The Employer did not report an amputation using one of the following methods: (i) By telephone or in person to the OSHA Area Office that is nearest to the site of the incident. (ii) By telephone to the OSHA toll-free central telephone number, 1-800-321-OSHA (1-800-321-6742). (iii) By electronic submission using the reporting application located on OSHA's public website at www.osha.gov.  9 Mohawk Drive, Leominster, MA: The employer did not notify OSHA within 24 hours of an amputation to an employee which occurred on June 18, 2015.
Recent events (2)
  • — I (O) $2500
  • — Z (O) $5000

View NEW England Wire Products, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340766260.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.