POPLAR BLUFF, MO ·
OSHA Inspection: NORTEK GLOBAL HVAC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of NORTEK GLOBAL HVAC in 1747 CRAVENS, POPLAR BLUFF, MO 63901 (NAICS 493110). OSHA activity number 340776525.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NORTEK GLOBAL HVAC
- Site address
- 1747 CRAVENS
- City
- POPLAR BLUFF
- State
- MO
- ZIP
- 63901
- Mailing
- 1747 CRAVENS, POPLAR BLUFF, MO 63901
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493110
- Employees
- 49
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.178 L02 II
- Issued
- Jul 22, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $7,000 · Current $4,900 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace: a. Employees had not completed the practical training and evaluation before be allowed to operate independent of a designated trainer. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed with the citation(s).
Recent events (2)
- · I (S) $4900
- · Z (S) $7000
1910.178 L03 I E
- Issued
- Jul 22, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(3)(i)(E): 29 CFR 1910.178(l)(3)(i)(E): Powered industrial truck operators did not receive initial training on steering and maneuvering: a. Employees had not received adequate practical training on steering and maneuvering of a stand-up forklift, in order to provide the experience necessary to safely operate without accident. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed with the citation(s).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 L06
- Issued
- Jul 22, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a. Before allowing employees to operate a forklift independent of a designated trainer, they were not certified. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed with the citation(s).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 L04 III
- Issued
- Jul 22, 2015
- Abate by
- Aug 17, 2015
- Penalty
- Initial $3,000 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a. At least one employee, who had been issued a re-certification, was not evaluated. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed with the citation(s).
Recent events (2)
- · I (S) $2100
- · Z (S) $3000
More inspections in this industry (NAICS 493110)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340776525.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.