PAINESVILLE, OH —
OSHA Inspection: A AND S CONSTRUCTION, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A AND S CONSTRUCTION, LLC in 8253 AUBURN ROAD., PAINESVILLE, OH 44077 (NAICS 238130). OSHA activity number 340780998.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A AND S CONSTRUCTION, LLC
- Site address
- 8253 AUBURN ROAD.
- City
- PAINESVILLE
- State
- OH
- ZIP
- 44077
- Mailing
- 15840 DURKEE RD., HUNTSBURG, OH 44046
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.102 A01
- Issued
- Sep 3, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: On or about July 14, 2015, the employer failed to ensure employees using a Milwaukee 6.5 inch Circular Saw, serial number F31AD1412 1653 to cut wood was protected against flying chips by wearing safety glasses.
Recent events (1)
- — Z (S) $1200
1926.501 B01
- Issued
- Sep 3, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: On or about July 14, 2015, the employer failed to ensure employees performing sheathing operations on a roof were protected from a fall of approximately 12 feet 1 inch by utilizing fall protective systems/devices.
Recent events (1)
- — Z (S) $2400
1926.1053 B01
- Issued
- Sep 3, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder: On or about July 14, 2015, the employer failed to ensure employees using a ladder to gain access to the roof were protected from a fall of approximately 12 feet by ensuring the ladder extended three (3) feet above the landing surface.
Recent events (1)
- — Z (S) $1600
More inspections in this industry (NAICS 238130)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340780998.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.