GLEN HEAD, NY —
OSHA Inspection: CMD WOODWORKING CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CMD WOODWORKING CORP. in 50 WHEATELY AVE., GLEN HEAD, NY 11545 (NAICS 236118). OSHA activity number 340787894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CMD WOODWORKING CORP.
- Site address
- 50 WHEATELY AVE.
- City
- GLEN HEAD
- State
- NY
- ZIP
- 11545
- Mailing
- 78 HORSEBLOCK RD., YAPHANK, NY 11980
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 20
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 B02
- Issued
- Jan 19, 2016
- Abate by
- Jan 25, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide: a) Worksite, 50 Wheately Rd. Brookville NY - Employees were installing exterior trim on a residential home while working from a carpenters bracket scaffold. The employees were working from a single scaffolding plank measuring 14 1/4inch wide; on or about 7/20/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.451 B06
- Issued
- Jan 19, 2016
- Abate by
- Jan 25, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(b)(6): On scaffolds where scaffold planks were abutted to create a long platform, each abutted end did not rest on a separate support surface: a) Worksite, 50 Wheately Rd. Brookville NY - Employees were installing exterior trim on a residential home while working from a carpenters bracket scaffold. Two abutted planks were being supported by the same 2x4inch support; on or about 7/20/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
1926.451 G01 VII
- Issued
- Jan 19, 2016
- Abate by
- Jan 25, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite, 50 Wheately Rd. Brookville NY - Employees were installing exterior trim on a residential home while working from a carpenters bracket scaffold. The employees were not protected from falling approximately 20ft to the ground below; on or about 7/20/15. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
More inspections at CMD Woodworking Corp.
View CMD Woodworking Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 236118)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340787894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.