TUCKER, GA —
OSHA Inspection: INLAND SEAFOOD
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of INLAND SEAFOOD in 1651 MONTREAL CIRCLE, TUCKER, GA 30084 (NAICS 311612). OSHA activity number 340789122.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INLAND SEAFOOD
- Site address
- 1651 MONTREAL CIRCLE
- City
- TUCKER
- State
- GA
- ZIP
- 30084
- Mailing
- 1651 MONTREAL CIRCLE, TUCKER, GA 30084
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311612
- Employees
- 534
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 B02
- Issued
- Dec 15, 2015
- Abate by
- Feb 3, 2016
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.22(b)(2): Permanent aisles and passageways were not appropriately marked. INLAND SEAFOOD, Tucker, GA- On or about 7/12/15, where pedestrian and power industrial truck traffic both occur, the employer has not ensured permanent aisles and passageways are appropriately marked or designated.
Recent events (2)
- — I (S) $2000
- — Z (S) $4000
1910.178 N04
- Issued
- Dec 15, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $4,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(n)(4): Industrial truck driver(s) were not required to slow down and sound the horn at cross aisles and wherever vision was obstructed: Inland Seafood-Tucker, GA-On or about 07/12/15, an employee was struck by a forklift while walking in the staging/docking area. While backing up, the forklift driver's vision was obstructed due to several pallets located in the staging area. The operator did not slow down, the horn was not blown, and the manufacturer's installed back up alarm was not working.
Recent events (2)
- — I (S) $0
- — Z (S) $4000
1910.178 N06
- Issued
- Dec 15, 2015
- Abate by
- Dec 28, 2015
- Penalty
- Initial $0 · Current $4,000
General-duty citation text
29 CFR 1910.178(n)(6): Industrial truck drivers were not required to look in the direction of, and keep a clear view of the path of travel: Inland Seafood-Tucker, GA-On or about 07/12/15, an employee was struck by a forklift while walking in the staging/docking area. While backing up, the forklift driver's vision was obstructed due to several pallets located in the staging area. The operator did not look in the direction of path, and the manufacturer's installed back up alarm was not working.
Recent events (2)
- — I (S) $4000
- — Z (S) $0
1910.178 L03 I J
- Issued
- Dec 15, 2015
- Abate by
- Jan 12, 2016
- Penalty
- Initial $4,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(3)(i)(J): Training did not include vehicle inspection and maintenance that the operators are required to perform: Inland Seafood-Tucker, GA-On or about 07/12/15, an employee was struck by a forklift while walking in the staging/docking area. While backing up, the forklift driver's vision was obstructed due to several pallets located in the staging area. The operator did not look in the direction of path, and the manufacturer's installed back up alarm was not working. The employer's vehicle inspections forms did not include inspections of the back up alarms. Also, vehicle inspections were not conducted or documented daily.
Recent events (2)
- — I (S) $0
- — Z (S) $4000
1910.178 P01
- Issued
- Dec 15, 2015
- Abate by
- Jan 12, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) Inland Seafood-Tucker, GA-On or about 07/12/15, an employee was struck by a forklift while walking in the staging/docking area. While backing up, the forklift driver's vision was obstructed due to several pallets located in the staging area. The operator did not look in the direction of path, and the manufacturer's installed back up alarm was not working.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 311612)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340789122.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.