Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DANVILLE COOPERATIVE ASSOCIATION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DANVILLE COOPERATIVE ASSOCIATION in 146 N. ARGONIA RD., ARGONIA, KS 67004 (NAICS 424510). OSHA activity number 340790062.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Danville Cooperative Association — free Get an email when a new federal OSHA severe-injury report for Danville Cooperative Association is published. One employer, no account, unsubscribe in one click.
Site address
146 N. ARGONIA RD.
City
ARGONIA
State
KS
ZIP
67004
Mailing
420 RYAN AVE, DANVILLE, KS 67036
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424510
Employees
2
Ownership type
A

6 citations on file for this inspection.

1910.145 F06

Other-than-serious 4 instances 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 21, 2015
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.145(f)(6):     Caution tags. Caution tags shall be used in minor hazard situations where a non-immediate or potential hazard or unsafe practice presents a lesser threat of employee injury. Caution tags shall be used only in these situations.
Recent events (2)
  • — I (O) $800
  • — Z (S) $1600

1910.219 C02 I

Other-than-serious 1 instance 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 29, 2015
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:    Employees performing housekeeping tasks on the motor platform in the headhouse were exposed to caught-by hazards in that the drive shaft for the bucket elevator leg head pulley was not guarded.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $2000

1910.219 D01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 29, 2015
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Employees working in the gallery performing maintenance and housekeeping tasks were exposed to amputation hazards in that the drive pulleys for the open belt conveyor were not fully guarded.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.219 D01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 29, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Employees working in the gallery performing maintenance and housekeeping tasks were exposed to amputation hazards in that the drive belts for the open belt conveyor were not fully guarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B02 II

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 29, 2015
Penalty
Initial $1,600 · Current $800 Reduced

Hazardous substances 0070X100

29 CFR 1910.253(b)(2)(ii): Cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons:     Employees working in the storage building were exposed to fire hazards and struck-by hazards in that acetylene welding cylinders and oxygen cylinders were not stored securely.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1910.253 B04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 24, 2015
Abate by
Dec 21, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 0070X100

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet:   Employees working in the storage building were exposed to fire hazards in that acetylene welding cylinders were stored with the oxygen cylinders.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Danville Cooperative Association's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340790062.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.