Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUIN-CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of QUIN-CO., INC. in 3690 CARLYLE CLOSE E., MOBILE, AL 36609 (NAICS 238160). OSHA activity number 340792068.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quin-Co., INC. — free Get an email when a new federal OSHA severe-injury report for Quin-Co., INC. is published. One employer, no account, unsubscribe in one click.
Establishment
QUIN-CO., INC.
Site address
3690 CARLYLE CLOSE E.
City
MOBILE
State
AL
ZIP
36609
Mailing
3345 ANTON ST., MOBILE, AL 36612
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
15
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 24, 2015
Abate by
Sep 18, 2015
Penalty
Initial $2,000 · Current $2,000
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:    (a)  At the worksite:  On July 22, 2015 and at times prior to; employees were exposed to struck-by hazards from lifted construction materials in that the below-the-hook lifting device (spreader Bar) that was used to lift steel sections and metal roofing materials was not legibly marked.
Recent events (3)
  • — A (S) $2000
  • — I (S) $1500
  • — Z (S) $2000

1926.760 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 24, 2015
Abate by
Sep 1, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:    (a)  At the worksite at 3690 Carlyle Close, Mobile, AL: On July 22, 2015 and at times prior to; employees were exposed to falls of at least 18 feet, 3 inches while affixing metal sheets on a 3:12 pitch roof with open sides and edges in that employees were not protected from falls by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, fall restraint systems or fall protection plan.
Recent events (3)
  • — A (S) $1600
  • — I (S) $500
  • — Z (S) $1600

1926.761 B

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 24, 2015
Abate by
Sep 11, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.761(b): The employer shall train each employee and shall institute a training program and ensure employee participation in the program for each employee exposed to a fall hazards in accordance with the requirements of this section:  (a)  At the worksite:  On July 22, 2015 and at times prior to; the employer exposed employees to falls of at least 18 feet while affixing metal decking on the roof of a metal structure in that all employees were not trained in the use of fall protection equipment or to identify hazards.
Recent events (3)
  • — A (S) $0
  • — I (S) $0
  • — Z (S) $0

1926.1412 F01

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 24, 2015
Abate by
Sep 18, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1412(f)(1): The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section.     (a) All locations:  On July 22, 2015 and at times prior to; employees were exposed to struck by hazards from a truck crane that has not received an annual inspection by a qualified person.
Recent events (3)
  • — A (S) $2000
  • — I (S) $1000
  • — Z (S) $2000

1926.1413 A02 I D

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 24, 2015
Abate by
Sep 1, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.1413(a)(2)(i)(D): A competent person must inspect end connections of the wire rope and ensure those connections are properly applied:  (a)  At the worksite:  On July 22, 2015 and at times prior to; employees were exposed to struck-by a crane load in that a competent person did not properly inspect the terminal end of the truck crane's wire rope in that the dead end of the wire rope passing through the Crosby wedge socket, was secured to the live end of the wire rope with a saddle clamp, creating a pinch of the live rope and an impending failure.
Recent events (3)
  • — A (S) $0
  • — I (S) $0
  • — Z (S) $0

1926.1417 E01 I

Serious Gravity 1 1 instance 4 exposed
Issued
Aug 24, 2015
Penalty
Initial $1,020 · Current $1,020
29 CFR 1926.1417(e)(1)(i): The operator must not leave a load suspended while occupied with other duties:    (a)  On the Northwest corner of the metal building being erected:  On July 22, 2015 and at times prior to; employees were exposed to struck by hazards from a suspended load of insulation weighing approximately 200 pounds in that the operator did not remain adjacent to the suspended load and the operator was engaged in other activities.
Recent events (3)
  • — A (S) $1020
  • — I (S) $500
  • — Z (S) $1020

1926.1425 C02

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 24, 2015
Abate by
Sep 1, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1425(c)(2): The employer did not make sure that hooks with self-closing latches were used while employees were hooking, unhooking, or guiding the load.      (a)  At the worksite:  On July 22, 2015 and at times prior to; the employer exposed employees to struck-by hazards in that the truck crane hook was not provided with a self closing latch.
Recent events (3)
  • — A (S) $2000
  • — I (S) $1500
  • — Z (S) $2000

View Quin-Co., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340792068.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.