Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MANUFACTURING CONSULTING SERVICES

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MANUFACTURING CONSULTING SERVICES in 41 HC PIONEER PARKWAY, SULPHUR SPRINGS, TX 75482 (NAICS 332420). OSHA activity number 340829811.

Watch Manufacturing Consulting Services — free Get an email when a new federal OSHA severe-injury report for Manufacturing Consulting Services is published. One employer, no account, unsubscribe in one click.
Site address
41 HC PIONEER PARKWAY
City
SULPHUR SPRINGS
State
TX
ZIP
75482
Mailing
41HC PIONEER PARKWAY, SULPHUR SPRINGS, TX 75482
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332420
Employees
93
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2450.00 Reduced
OSH Act of 1970 Section 5(a)(1):  The employer does not furnish to each of his employees employment and a place of employment which are free from recognized hazards such as crushed-by hazards that are causing or likely to cause death or serious physical harm to his employees:    (a) Employees in the west building were exposed to crushed-by hazards when the safety latches were removed from the hooks on a 20 ton crane;    (b) Employees in the west building were exposed to crushed-by hazards from a self-closing safe latch that was not functional on the hooks on a 5 ton crane.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.101 B

Serious Gravity 5 2 instances 75 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2000.00 Reduced
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6:    Section 3.4.4, Compressed Gas Association Pamphlet P11965, as adopted by 29 CFR 1910.101(b): Compressed gas cylinder(s) not in use were not properly supported to prevent them from being knocked over:    (a) Oxygen cylinders in the main building were stored upright but were not secured with a chain or strap to prevent them from falling;    (b) Acetylene cylinders in the main building were stored upright but were not secured with a chain or strap to prevent them from falling.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2800

1910.253 B04 III

Serious Gravity 5 2 instances 75 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $0.00 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:    (a) In the main building, oxygen cylinders were stored closer than 20 feet from acetylene cylinders;    (b) In the west building, oxygen cylinders were stored closer than 20 feet from acetylene cylinders.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3500

1910.243 C03

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $2450.00 Reduced
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel:    (a) Employees were exposed to struck-by hazards while using an unguarded angle grinder to grind metal for welding.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.254 D08

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $0.00 Reduced
29 CFR 1910.254(d)(8): Welding cables with splices within 10 feet (3 m) of the holder were used:  (a) Employees were exposed to electrocution hazards from using welding cables that contained splices within 10 feet of the holder.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3500

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340829811.