KINGSTON, NY ·
OSHA Inspection: C & A CUSTOM BUILDERS
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of C & A CUSTOM BUILDERS in 76 BOICES LN, KINGSTON, NY 12401 (NAICS 236220). OSHA activity number 340831775.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C & A CUSTOM BUILDERS
- Site address
- 76 BOICES LN
- City
- KINGSTON
- State
- NY
- ZIP
- 12401
- Mailing
- PO BOX 525, BEARSVILLE, NY 12409
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 7
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Dec 30, 2015
- Abate by
- Feb 3, 2016
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: A) Welding Area - On or about August 6, 2015, a respiratory protection program was not established and implemented for the welder who was required to wear a half-face air purifying respirator while welding.
Recent events (2)
- · I (S) $1500
- · Z (S) $2000
1910.134 K01
- Issued
- Dec 30, 2015
- Abate by
- Feb 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1): The employer did not provide effective training that covered the required elements in 1910.134(k)(1)(i) through 1910.134(k)(1)(vii): A) Welding Area - On or about August 6, 2015, a respiratory protection training was not provided to the welder who was required to wear a half-face air purifying respirator while welding.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.134 E01
- Issued
- Dec 30, 2015
- Abate by
- Feb 3, 2016
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: A) Welding Area - On or about August 6, 2015, a medical evaluation was not provided to the welder who was required to wear a half-face air purifying respirator while welding.
Recent events (2)
- · I (S) $1500
- · Z (S) $2000
1910.134 F02
- Issued
- Dec 30, 2015
- Abate by
- Feb 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: A) Welding Area - On or about August 6, 2015, the welder who was required to wear a half-face air purifying respirator while welding was not fit tested prior to the use of the respirator.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 236220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340831775.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.