REVERE, MA —
OSHA Inspection: CARUSO CONSTRUCTION AND EQUIPMENT COMPANY, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of CARUSO CONSTRUCTION AND EQUIPMENT COMPANY, INC. in 320 CHARGER STREET, REVERE, MA 02151 (NAICS 811310). OSHA activity number 340846880.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARUSO CONSTRUCTION AND EQUIPMENT COMPANY, INC.
- Site address
- 320 CHARGER STREET
- City
- REVERE
- State
- MA
- ZIP
- 02151
- Mailing
- 320 CHARGER STREET, REVERE, MA 02151
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 25
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.177 C01
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $2,800 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved, the safety procedures to follow while servicing rim wheels and all tasks listed in 29 CFR 1910.177(c)(1)(i) through (iii). Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, the employer failed to develop and implement a training program for employees who service rim wheels and the hazards involved and the safety procedures to follow while servicing rim wheels.
Recent events (2)
- — I (S) $2400
- — Z (S) $2800
1910.177 C02
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $2,800 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.177(c)(2): The employer did not assure that each employee demonstrated the ability to safely service rim wheels by effective performance of all tasks listed in 29 CFR 1910.177(c)(2)(i) through (viii). Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, the employer failed to assure that each employee demonstrated the ability to safely service rim wheels by effective performance of all tasks.
Recent events (2)
- — I (S) $2400
- — Z (S) $2800
1910.177 C03
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(c)(3): The employer did not evaluate each employee's ability to service rim wheels safely. Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, the employer failed to ensure that each employee demonstrated the ability to safely service rim wheels by effective performance of all tasks..
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 D04
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $2,800 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.177(d)(4): The employer did not furnish or assure that employees use an air line assembly which includes a clip-on chuck, an inline valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck and the in-line (if one is used) to allow the employee to stand outside the trajectory: Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, employees inflating tires were not required to use or provided an air line assembly which includes a clip-on chuck, an inline valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck and the in-line (if one is used) to allow the employee to stand outside the trajectory.
Recent events (2)
- — I (S) $2400
- — Z (S) $2800
1910.177 D05
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $2,800 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.177(d)(5): Current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area. Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area.
Recent events (2)
- — I (S) $2400
- — Z (S) $2800
1910.177 G
- Issued
- Feb 8, 2016
- Abate by
- Mar 25, 2016
- Penalty
- Initial $2,800 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.177(g): The employer did not establish a safe operating procedure for servicing single piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(g)(1) through (12). Location - 320 Charger St. Revere, MA On or about Aug 13, 2015, the employer failed to develop and implement safe operating procedures for employees servicing single piece rim wheels and ensure that employees are instructed in and follow that procedure.
Recent events (2)
- — I (S) $2400
- — Z (S) $2800
More inspections at Caruso Construction and Equipment Company, INC.
View Caruso Construction and Equipment Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340846880.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.