BAINBRIDGE, NY —
OSHA Inspection: UPTURN INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UPTURN INDUSTRIES, INC. in 2-4 WHITNEY WAY, BAINBRIDGE, NY 13733 (NAICS 332710). OSHA activity number 340848407.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UPTURN INDUSTRIES, INC.
- Site address
- 2-4 WHITNEY WAY
- City
- BAINBRIDGE
- State
- NY
- ZIP
- 13733
- Mailing
- 2-4 WHITNEY WAY, BAINBRIDGE, NY 13733
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 24
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.23 D01 II
- Issued
- Sep 9, 2015
- Abate by
- Oct 14, 2015
- Penalty
- Initial $1,020 · Current $765 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(ii): Stairway(s) less than 44 inches wide having one side open, did not have at least one stair railing on the open side: a) Storage Area, on or about 8/13/15: A stairway with 13 risers to a storage area was not provided with standard stair railings on the right side for the last four steps descending. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $765
- — Z (S) $1020
1910.212 A01
- Issued
- Sep 9, 2015
- Abate by
- Oct 14, 2015
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts and unused portion of bandsaw blade: a) Lathe Area, on or about 8/13/15: Rotating chuck on a Skil drill press across from the Hardinge lathe was not guarded. b) Lathe Area, on or about 8/13/15: Rotating chuck on a Black Bull drill press next to the Bridgeport milling machine was not guarded. c) Prodigy Lathe Area, on or about 8/13/15: Rotating chuck on a Skil drill press was not guarded. d) Wia Area, on or about 8/13/15: Rotating chuck on a Skil drill press next to the Hyundai Wia lathe was not guarded. e) Lathe Area, on or about 8/13/15: Rotating chuck on a Skil drill press next to the Hardinge Quest GT27 lathe was not guarded. f) Deburring Room, on or about 8/13/15: Rotating chucks on three Skil drill presses were not guarded. g) Tool Room, on or about 8/13/15: Rotating chuck on a Powermatic drill press was not guarded. h) Stock Room, on or about 8/13/15: Unused portion of blade on a Jet horizontal bandsaw was not guarded on the right side. Abatement certification must be submitted for these items.
Recent events (2)
- — I (S) $2100
- — Z (S) $2800
1910.305 G01 IV A
- Issued
- Sep 9, 2015
- Abate by
- Oct 14, 2015
- Penalty
- Initial $1,020 · Current $765 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) Lathe Area, on or about 8/13/15: Extension cords and strip outlets were strung together along the floor under the workbench next to Hardinge Lathe GSC and were being used as permanent wiring to power deburring wheels, portable tools, etc. b) HGT Area, on or about 8/13/15: A strip outlet powering a deburring wheel and portable tools next to the Hardinge lathe HGT-4 was being used as permanent wiring. c) Prodigy Lathe Area, on or about 8/13/15: A strip outlet on the floor was being used as permanent wiring to power a deburring wheel and a Skil drill press. d) Wia Area, on or about 8/13/15: Extension cords were strung along the floor and being used as permanent wiring to power a Skil drill press. Abatement certification must be submitted for these items.
Recent events (2)
- — I (S) $765
- — Z (S) $1020
More inspections at Upturn Industries, INC.
View Upturn Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340848407.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.