RUMFORD, RI —
OSHA Inspection: INTERPLEX ENGINEERED PRODUCTS
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of INTERPLEX ENGINEERED PRODUCTS in 231 FERRIS AVE, RUMFORD, RI 02916 (NAICS 334417). OSHA activity number 340848969.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERPLEX ENGINEERED PRODUCTS
- Site address
- 231 FERRIS AVE
- City
- RUMFORD
- State
- RI
- ZIP
- 02916
- Mailing
- 231 FERRIS AVE, RUMFORD, RI 02916
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334417
- Employees
- 195
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 A
- Issued
- Dec 17, 2015
- Penalty
- Initial $2,700 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a) Plating Department: On or about 8/12/15 the employer did not ensure that adequate protective equipment was used to protect the arms and body when working with plating chemical baths. b) Plating Department: On or about 10/23/15 the employer did not ensure that adequate protective equipment was used to protect the arms and body when working with plating chemical baths.
Recent events (2)
- — I (S) $1890
- — Z (S) $2700
1910.132 D02
- Issued
- Dec 17, 2015
- Abate by
- Feb 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) Plating Department: On or about 8/12/15 the employer had not certified that the required workplace hazard assessment had been performed. Abatement Note: Once the PPE Hazard Assessment is completed you shall: 1) Certify that the hazard assessment has been performed through a written certification in accordance with 1910.132 (d)(2), 2) Provide training to affected employees in proper use of required PPE (1910.132 (f)(1)), and Guidance on conducting and documenting a PPE Hazard Assessment can be found on OSHA's website at: http://www.osha.gov/SLTC/personalprotectiveequipment/
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.133 A01
- Issued
- Dec 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Plating Department: On or about 8/12/15 the employer did not ensure that adequate protective equipment was used to protect the face and eyes when working with plating chemical baths. b) Plating Department: On or about 10/23/15 the employer did not ensure that adequate protective equipment was used to protect the face and eyes when working with plating chemical baths.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.124 J02 I
- Issued
- Dec 17, 2015
- Abate by
- Feb 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.124(j)(2)(i): The employer did not ensure airflow was adequate at least quarterly during operation: a) Plating Operations. On or about 8/12/15 the employer had not verified at least quarterly that the airflow in the local ventilation system serving the plating lines was adequate.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Interplex Engineered Products
View Interplex Engineered Products's full OSHA safety record →
More inspections in this industry (NAICS 334417)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340848969.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.