Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BILL WILLIAMS TIRE CENTER

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BILL WILLIAMS TIRE CENTER in 1160 HORIZON BLVD, HORIZON CITY, TX 79928 (NAICS 441320). OSHA activity number 340868678.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bill Williams Tire Center — free Get an email when a new federal OSHA severe-injury report for Bill Williams Tire Center is published. One employer, no account, unsubscribe in one click.
Site address
1160 HORIZON BLVD
City
HORIZON CITY
State
TX
ZIP
79928
Mailing
1160 HORIZON BLVD, HORIZON CITY, TX 79928
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
441320
Employees
9
Ownership type
A

5 citations on file for this inspection.

1910.178 A04

Serious Gravity 5 1 instance 9 exposed
Issued
Nov 19, 2015
Abate by
Dec 11, 2015
Penalty
Initial $3,600 · Current $2,500 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval.      Trailer yard: On or about August 21, 2015, and at times prior thereto, The employer allowed the use of a forklift attachment (fork extension) that was not approved by manufacture affecting the forklift capacity and safe operation.  This condition exposed employees to struck-by and/or caught between hazards.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3600

1910.178 Q01

Serious Gravity 5 1 instance 9 exposed
Issued
Nov 19, 2015
Abate by
Dec 11, 2015
Penalty
Initial $3,600 · Current $2,500 Reduced
29 CFR 1910.178(q)(1): A power-operated industrial truck not in safe operating condition was not removed from service.    Trailer yard: On or about August 21, 2015, and at times prior thereto, employees were using a Hyster LPG power-industrial truck with hand brake that was not operating safely.  This condition exposed employees to struck-by and/or caught between hazards
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3600

1910.178 Q07

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 19, 2015
Abate by
Dec 11, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks was not examined daily before being placed in service.    Trailer yard and shop: On or about August 21, 2015, and at times prior thereto, employees were using a power-industrial truck that was not inspected daily before it was placed in service.  This condition exposed employees to struck-by and/or caught between hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.39 A02

Other-than-serious 1 instance 8 exposed
Issued
Nov 19, 2015
Abate by
Dec 11, 2015
Penalty
Initial $4,500 · Current $1,000 Reduced
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, the employer did not report the in-patient hospitalization, amputation, or loss of an eye to OSHA.     On or about August 21, 2015, and at times prior thereto, the Employer did not report the in-patient hospitalization of one of their employees.
Recent events (2)
  • — I (O) $1000
  • — Z (O) $4500

1910.178 L01 I

Other-than-serious 1 instance 7 exposed
Issued
Nov 19, 2015
Abate by
Dec 11, 2015
Penalty
Initial $900 · Current $500 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).    On or about August 11, 2015, and at times prior thereto, the employer allowed employees to operate a forklift without ensuring operator's competency to drive the forklift safely.  This condition exposed employees to struck-by and/or caught between hazards.
Recent events (2)
  • — I (O) $500
  • — Z (O) $900

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340868678.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.