CUMMING, GA ·
OSHA Inspection: DANIEL ARIAS - RIVERA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DANIEL ARIAS - RIVERA in 3890 CAMERON CT, CUMMING, GA 30040 (NAICS 238130). OSHA activity number 340879980.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DANIEL ARIAS - RIVERA
- Site address
- 3890 CAMERON CT
- City
- CUMMING
- State
- GA
- ZIP
- 30040
- Mailing
- 3852 MC ELROY, APT. H 13, ATLANTA, GA 30341
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.304 D
- Issued
- Sep 30, 2015
- Abate by
- Oct 27, 2015
- Penalty
- Initial $3,080 · Current $3,080
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about 8/27/15 located at 3890 Cameron Ct., Cumming, GA: Employees that were operating the skill saws used a piece of wood to wedge and hold the guard for the blade in the open position, while cutting 2x4s and plywood.
Recent events (1)
- · Z (S) $3080
1926.501 B01
- Issued
- Sep 30, 2015
- Abate by
- Oct 27, 2015
- Penalty
- Initial $3,080 · Current $3,080
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. On or about 8/27/15 located at 3890 Cameron Ct., Cumming, GA: Employees were framing the floor and the walls on the 2nd floor of an house that was under construction while working at the edges of the staircase floor hole opening, the employer did not ensure that guardrails or floor hole coverings was used by the employees while exposed to fall hazards of approximately up to 9 feet.
Recent events (1)
- · Z (S) $3080
1926.1053 B06
- Issued
- Sep 30, 2015
- Abate by
- Oct 27, 2015
- Penalty
- Initial $3,080 · Current $3,080
General-duty citation text
29 CFR 1926.1053(b)(6): Ladders were used on surfaces which were not stable and level: On or about 8/27/15 located at 3890 Cameron Ct., Cumming, GA: Employees were using a portable extension ladder that extended 11 feet, the ground which it set on had unstable surface and tilting way off center, exposing employees to a fall hazard.
Recent events (1)
- · Z (S) $3080
1926.501 B13
- Issued
- Sep 30, 2015
- Abate by
- Oct 27, 2015
- Penalty
- Initial $6,160 · Current $6,160
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about 8/27/15 located at 3890 Cameron Ct., Cumming, GA: Employees were installing 2x4 walls and framing on the 2nd floor while working at the edge, the employer did not ensure that fall protection was used by the employees while exposed to fall hazards of approximately up to 11 feet.
Recent events (1)
- · Z (R) $6160
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340879980.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.