Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: BUNGE NORTH AMERICA (EAST), LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BUNGE NORTH AMERICA (EAST), LLC in 605 GOODRICH ROAD, BELLEVUE, OH 44811 (NAICS 311224). OSHA activity number 340881465.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bunge North America (East), LLC for free Get an email when a new federal OSHA severe-injury report for Bunge North America (East), LLC is published. One employer, no account, unsubscribe in one click.
Site address
605 GOODRICH ROAD
City
BELLEVUE
State
OH
ZIP
44811
Mailing
P.O. BOX 369, BELLEVUE, OH 44811
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311224
Employees
175
Ownership type
Private (A)

3 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 8 exposed
Issued
Nov 24, 2015
Abate by
Dec 4, 2015
Penalty
Initial $7,000 · Current $7,000
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  A)    Bunge North America (East), LLC, located at 605 Goodrich Road, Bellevue, OH 44811: On or about August 24, 2015, the employer did not develop and implement specific procedures to control hazardous energy of the equipment such as, but not limited to, the East Scales clamshell located on the 4th floor. Employees did not control all hazardous energy sources such as, but not limited to, pneumatic before performing activities such as, but not limited to, making adjustments to the clamshell's bracket. Employees were exposed to amputation hazards.
Recent events (2)
  • · I (S) $7000
  • · Z (S) $7000

1910.147 D

Serious Gravity 10 1 instance 8 exposed
Issued
Nov 24, 2015
Abate by
Dec 4, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):   A)    Bunge North America (East), LLC, located at 605 Goodrich Road, Bellevue, OH 44811: On or about August 24, 2015, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d) and required for the control of the hazardous energy sources such as, but not limited to, pneumatic were followed before employees conducted activities such as, but not limited to, making adjustments to the bracket of the East Scales clamshell located on the 4th floor. Employees were exposed to amputation hazards while all hazardous energy sources such as, but not limited to, pneumatic were not controlled prior to conducting work.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.147 C07 I

Deleted Serious Gravity 10 1 instance 8 exposed
Issued
Nov 24, 2015
Abate by
Dec 4, 2015
Penalty
Initial $7,000 · Current $0 Reduced
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:  A)    Bunge North America (East), LLC, located at 605 Goodrich Road, Bellevue, OH 44811: On or about August 24, 2015, the employer failed to properly train employees to lockout/tagout the equipment such as, but not limited to, the East Scales clamshell, located on the 4th floor, before employees conducted activities such as, but not limited to, making adjustments to the clamshell's bracket. Employees were exposed to amputation hazards while all hazardous energy sources such as, but not limited to, pneumatic were not controlled prior to conducting work.
Recent events (2)
  • · I (S) $0
  • · Z (S) $7000

View Bunge North America (East), LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340881465.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.