WILMETTE, IL —
OSHA Inspection: RICHARD BUDASZ DBA RICH B. CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RICHARD BUDASZ DBA RICH B. CONSTRUCTION, INC. in 1524 ELMWOOD AVE., WILMETTE, IL 60091 (NAICS 238160). OSHA activity number 340884105.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RICHARD BUDASZ DBA RICH B. CONSTRUCTION, INC.
- Site address
- 1524 ELMWOOD AVE.
- City
- WILMETTE
- State
- IL
- ZIP
- 60091
- Mailing
- 6150 N. MILWAUKEE AVE., CHICAGO, IL 60646
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Sep 3, 2015
- Abate by
- Sep 10, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: a) Employees were not wearing protective helmets where there was a possible danger of head injury. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $1600
1926.416 A01
- Issued
- Sep 3, 2015
- Abate by
- Sep 10, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means: a) Employees were not protected against accidental contact with energized overhead power lines during roofing work. The overhead power lines consisted of secondary lines having a voltage rating of 120/240 volts. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2000
1926.503 A01
- Issued
- Sep 3, 2015
- Abate by
- Oct 7, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards: a) Employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2000
1926.501 B13
- Issued
- Sep 3, 2015
- Abate by
- Sep 10, 2015
- Penalty
- Initial $5,600 · Current $5,600
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Employees engaged in roofing activity were not protected from fall hazards while working at an elevation of approximately 20.7 feet above the ground. The Richard Budasz dba Rich B. Construction, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 986307, citation number 1, item number 1 and was affirmed as a final order on August 6, 2014, with respect to a workplace located at 1025 NaWaTa Ave., Mount Prospect, IL 60056. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (R) $5600
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340884105.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.