Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROCKWELL AMERICAN

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ROCKWELL AMERICAN in 519 DUCK ROAD, GRANDVIEW, MO 64030 (NAICS 336330). OSHA activity number 340891621.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rockwell American — free Get an email when a new federal OSHA severe-injury report for Rockwell American is published. One employer, no account, unsubscribe in one click.
Establishment
ROCKWELL AMERICAN
Site address
519 DUCK ROAD
City
GRANDVIEW
State
MO
ZIP
64030
Mailing
519 DUCK ROAD, GRANDVIEW, MO 64030
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336330
Employees
8
Ownership type
A

4 citations on file for this inspection.

1910.26 C02 VII

Serious Gravity 1 1 instance 5 exposed
Issued
Sep 22, 2015
Penalty
Initial $2,100 · Current $1,470 Reduced
29 CFR 1910.26(c)(2)(vii): 1910.26(c)(2)(7): Ladders having defects were not marked and taken out of service until repaired.  (a) Warehouse:  Employees were exposed to fall hazards as the two small rolling ladders were bent, parts were broken and they were not taken out of service.  This violation was abated during inspection. Abatement certification for this violation is not required.
Recent events (2)
  • — I (S) $1470
  • — Z (S) $2100

1910.36 G02

Serious Gravity 1 1 instance 7 exposed
Issued
Sep 22, 2015
Penalty
Initial $2,100 · Current $1,470 Reduced
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  (a)  Southwest Wall:  Employees were exposed to fire hazards as the Southwest Exit Door was blocked by fenders and a pallet of nuts and bolts.  (b) Northwest Wall:  Employees were exposed to fire hazards as the Northwest Exit Door was blocked by tires.   This violation was abated during inspection. Abatement certification for this violation is not required.
Recent events (2)
  • — I (S) $1470
  • — Z (S) $2100

1910.176 B

Serious Gravity 5 1 instance 5 exposed
Issued
Sep 22, 2015
Abate by
Oct 25, 2015
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1910.176(b): Storage of material created a hazard:  (a)  Warehouse:  Employees were exposed to overhead hazards as shelving was bent and had not be repaired or replaced such as:  Racking by electric breaks, racking by small parts area, racking by overstock area, J fender aisle, south end of K racks, K-7 bent and J-6 cross bracing.   Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

1910.303 G01 II

Serious Gravity 5 1 instance 5 exposed
Issued
Sep 22, 2015
Penalty
Initial $2,800 · Current $1,960 Reduced
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:  (a) Northwest Wall:  Employees were exposed to electrical hazards as the breaker boxes on the north wall were blocked by a fender and a pallet of U bolts.  This violation was abated during inspection. Abatement certification for this violation is not required.
Recent events (2)
  • — I (S) $1960
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340891621.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.