CHICAGO, IL ·
OSHA Inspection: EDMUNDO LOPEZ DBA EDMUNDO LOPEZ
Fatality or catastrophe inspection · Safety discipline
At a glance
On , OSHA opened a fatality or catastrophe safety inspection of EDMUNDO LOPEZ DBA EDMUNDO LOPEZ in 8527 W. WINNEMAC AVE., CHICAGO, IL 60656 (NAICS 238310). OSHA activity number 340893809.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDMUNDO LOPEZ DBA EDMUNDO LOPEZ
- Site address
- 8527 W. WINNEMAC AVE.
- City
- CHICAGO
- State
- IL
- ZIP
- 60656
- Mailing
- 2219 N. MONITOR AVE., BASEMENT UNIT, CHICAGO, IL 60639
What kind of inspection was it?
- Inspection type
- Fatality or catastrophe (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238310
- Employees
- 2
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- May 2, 2016
- Abate by
- Jun 3, 2016
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Edmundo Lopez dba Edmundo Lopez, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 01a 03/28/2016 01 01b 03/28/2016 01 02 03/01/2016 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- · Z (O) $400
1926.20 B01
- Issued
- Feb 24, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part: a) The employer did not maintain programs to provide for compliance with the OSH Act and control or minimize safety and health hazards associated with the work that his employees are required to perform. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- · Z (S) $2800
1926.21 B02
- Issued
- Feb 24, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a) Employer did not instruct or provide instruction to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- · Z (S) $0
1926.403 I02 I
- Issued
- Feb 24, 2016
- Abate by
- Mar 1, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph: a) On or about September 2, 2015, employees were exposed to electrical hazards where electrical panels did not have covers exposing them to accidental contact with live parts. b) On or about September 2, 2015, employees were exposed to electrical hazards where electrical boxes did not have covers exposing them to accidental contact with live parts. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- · Z (S) $2800
More inspections in this industry (NAICS 238310)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340893809.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.