COPLEY, OH —
OSHA Inspection: THE APOSTOLOS GROUP, INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of THE APOSTOLOS GROUP, INC in 1122 JACOBY RD, COPLEY, OH 44321 (NAICS 332812). OSHA activity number 340913532.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE APOSTOLOS GROUP, INC
- Site address
- 1122 JACOBY RD
- City
- COPLEY
- State
- OH
- ZIP
- 44321
- Mailing
- 1122 JACOBY RD, COPLEY, OH 44321
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 42
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.1000 A02
- Issued
- Jan 13, 2016
- Abate by
- Apr 13, 2016
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Barium Sulfate listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of 5.00 mg/m3 respirable fraction: On or about September 24, 2015, the employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 9.930 milligrams barium sulfate per cubic meter of air (mg/m3) which is 1.986 times the permissible exposure limit of 5.0 mg/m3. The sampling was performed for 385 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (95 minutes). Exposure to barium sulfate respirable dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure.
Recent events (2)
- — I (O) $2250
- — Z (S) $4500
1910.1000 C
- Issued
- Jan 13, 2016
- Abate by
- Apr 13, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1000(c): An employee was exposed to Respirable Dust and Total Dust in excess of the 8-hour time weighted average limits of 5.00 mg/m3 and 15.00 mg/m3 listed in Table Z-3. a) On or about September 24, 2015, the employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 9.930 milligrams PNOR respirable dust per cubic meter of air (mg/m3) which is 1.986 times the permissible exposure limit of 5.0 mg/m3. The sampling was performed for 385 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (95 minutes). Exposure to respirable dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure. b) On or about September 24, 2015, the employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 154.535 milligrams PNOR total dust per cubic meter of air (mg/m3) which is 10.302 times the permissible exposure limit of 15.0 mg/m3. The sampling was performed for 389 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (91 minutes). Exposure to total dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1000 E
- Issued
- Jan 13, 2016
- Abate by
- Apr 13, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d): On or about September 24, 2015, feasible engineering or administrative controls were not adequately implemented to keep employee exposure to air contaminants within the limits prescribed in the standard. a) The employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 9.930 milligrams barium sulfate per cubic meter of air (mg/m3) which is 1.986 times the permissible exposure limit of 5.0 mg/m3. The sampling was performed for 385 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (95 minutes). Exposure to barium sulfate respirable dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure. b) The employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 9.930 milligrams PNOR respirable dust per cubic meter of air (mg/m3) which is 1.986 times the permissible exposure limit of 5.0 mg/m3. The sampling was performed for 385 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (95 minutes). Exposure to respirable dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure. c) The employee who was operating the powder coating equipment was exposed an 8-hour time weighted average concentration of 154.535 milligrams PNOR total dust per cubic meter of air (mg/m3) which is 10.302 times the permissible exposure limit of 15.0 mg/m3. The sampling was performed for 389 minutes during one shift on September 24, 2015. Zero exposure was assumed for the un-sampled period of time (91 minutes). Exposure to total dusts causes cumulative lung disease in humans. Engineering and work practice controls can be used to reduce employee exposure.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections in this industry (NAICS 332812)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340913532.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.