ARLINGTON HEIGHTS, IL —
OSHA Inspection: MIGUEL DOMINGUEZ DBA QUALITY ROOFING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL DOMINGUEZ DBA QUALITY ROOFING in 939 N. FERNANDEZ, ARLINGTON HEIGHTS, IL 60005 (NAICS 238160). OSHA activity number 340955632.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL DOMINGUEZ DBA QUALITY ROOFING
- Site address
- 939 N. FERNANDEZ
- City
- ARLINGTON HEIGHTS
- State
- IL
- ZIP
- 60005
- Mailing
- 631 VENT STREET, ELGIN, IL 60120
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.501 B13
- Issued
- Nov 18, 2015
- Abate by
- Nov 24, 2015
- Penalty
- Initial $2,800 · Current $2,200 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) Employees were exposed to the hazard of falling approximately two stories while performing roofing work on a pitched roof of a residential structure. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation; item f (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2200
- — Z (S) $2800
1926.502 D16 III
- Issued
- Nov 18, 2015
- Abate by
- Nov 24, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level: a) Personal fall arrest equipment was not rigged to prevent employees from being exposed to the hazard of free falling more than 6 feet while performing roofing work. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1926.1053 B16
- Issued
- Nov 18, 2015
- Penalty
- Initial $2,800 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired: a) A portable extension ladder provided for use between the first and second story roof surfaces had broken rung locks between the fly section (top section) and the base section (bottom section) of the ladder. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $2000
- — Z (S) $2800
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340955632.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.