OSHA Inspection: C & C XPRESS, LLC.

Issued

2016-01-07 00:00:00

Abate by

2016-02-03 00:00:00

Penalty

Initial $2100.00 · Current $1260.00 Reduced

General-duty citation text

29 CFR 1910.36(g)(1): Ceiling of an exit route was not at least seven feet six inches.  Any projection from the ceiling must not reach a point less than six feet eight inches from the floor.  a.  Consolidation area - The path of an exit underneath the consolidation line exposed employees to struck by and potential blocked exits because the conveyor height was less than 6 feet 6 inches in height.

Issued

2016-01-07 00:00:00

Abate by

2016-01-20 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:   a.  Consolidation Line - The rotating parts of the powered roll conveyor were not provided with an effective means of guarding thereby exposing employees to rotating part hazards.

Issued

2016-01-07 00:00:00

Abate by

2016-01-13 00:00:00

Penalty

Initial $4900.00 · Current $2940.00 Reduced

General-duty citation text

29 CFR 1910.305(d)(1): Switchboards with exposed live parts were not located in permanently dry locations and accessible only to qualified persons  a.  Consolidation Line Area - The 480/277 Power Panel was accessed by unqualified persons thereby exposing them to shock and arc flash hazards.