WORCESTER, MA —
OSHA Inspection: KILLEEN MACHINE TOOL CO. INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of KILLEEN MACHINE TOOL CO. INC. in 33 HERMON ST., WORCESTER, MA 01610 (NAICS 332116). OSHA activity number 340957364.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KILLEEN MACHINE TOOL CO. INC.
- Site address
- 33 HERMON ST.
- City
- WORCESTER
- State
- MA
- ZIP
- 01610
- Mailing
- 33 HERMON ST., WORCESTER, MA 01610
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 49
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 17, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about 10/5/2015 and at times prior throughout the facility at 33 Hermon St., Worcester, MA 01610 the employer had not developed written specific energy control procedures to control energy sources when performing maintenance, servicing, etc., for equipment such as, but not limited to, Minster Press, Model #E2-200, S/N E2-200-21337.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.147 C05 II
- Issued
- Feb 17, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not used for lockout and tagout purposes only: On or about 10/6/2015 in Department 94, 33 Hermon Street, Worcester, MA 01610 and at times earlier employees were exposed to hazards from hazardous energy resulting from the use of Lockout and tagout devices to prevent unauthorized startup during normal operations.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Feb 17, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about 10/5/2015 and at times prior throughout the facility at 33 Hermon St., Worcester, MA 01610, periodic inspections of energy control procedures had not been conducted annually, nor within a 12 month period.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.147 C06 II
- Issued
- Feb 17, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: On or about 10/5/2015 and at times prior throughout the facility at 33 Hermon St., Worcester, MA 01610 periodic inspections of energy control procedures were not certified.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Feb 17, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. On or about 1/26/2016 and at times prior throughout the facility at 33 Hermon St., Worcester, MA 01610 authorized employee Lock out Tag out training did not include training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.212 A02
- Issued
- Feb 17, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: On or about 10/6/2015 and at times prior in the machine shop portable machine guards were used in lieu of fixed guards on machines such as, but not limited to Bridgeport Series I, milling machines.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
More inspections at Killeen Machine Tool CO. INC.
View Killeen Machine Tool CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340957364.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.