WASHINGTON, DC —
OSHA Inspection: MURPHY'S AUTO BODY INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of MURPHY'S AUTO BODY INC. in 1708 GOODHOPE ROAD SE, WASHINGTON, DC 20020 (NAICS 811121). OSHA activity number 340961432.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MURPHY'S AUTO BODY INC.
- Site address
- 1708 GOODHOPE ROAD SE
- City
- WASHINGTON
- State
- DC
- ZIP
- 20020
- Mailing
- 1708 GOODHOPE ROAD SE, WASHINGTON, DC 20020
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 19
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Dec 30, 2015
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,000 · Current $2,000
15929965
General-duty citation text
29 CFR 1910.134(c)(1): The employer did not establish and implement a written respiratory protection program, including worksite specific procedures and all applicable provisions of this section, in the workplace where respirators were required by the employer as necessary to protect the health of the employee: (a) Garage - Employees required to wear Gerson One-Step P95 model half-face respirator tight-fitting respirators while conducting spray finishing operations had not been provided a written respiratory protection program, on or about September 15, 2015. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.134 E01
- Issued
- Dec 30, 2015
- Abate by
- Feb 4, 2016
- Penalty
- Initial $0 · Current $0
15929965
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Garage - A painter required to wear Gerson One-Step P95 model half-face respirator tight-fitting respirators while conducting spray finishing operations had not been provided a medical evaluation, on or about September 15, 2015. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- Dec 30, 2015
- Abate by
- Jan 8, 2016
- Penalty
- Initial $0 · Current $0
9965C326
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A):Employer allowed respirators with tight-fitting facepieces to be worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: (a) Garage - A painter's helper was observed having a full beard while wearing a Gerson One-Step P95 model half-face tight-fitting respirator as he was conducting automotive paint repair operations, on or about September 25, 2015. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Dec 30, 2015
- Abate by
- Jan 6, 2016
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i (a) Garage- An employee was observed exposing himself to the risk of eye injury from airborne dust particles while cleaning the interior of an automobile using a compressed air hose regulated at 140 psi, on or about September 15, 2015. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (O) $0
- — Z (S) $2800
1910.1200 E01
- Issued
- Dec 30, 2015
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,000 · Current $2,000
2590
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement and maintain at the workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g) and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met: (a) Garage - A painter conducting auto body repair operations was not informed and trained on the hazards in using products including but not limited to BC Intermix, a product containing the hazardous chemical xylene, on or about September 15, 2015. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.1200 H01
- Issued
- Dec 30, 2015
- Abate by
- Feb 4, 2016
- Penalty
- Initial $0 · Current $0
2590
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Garage - A painter conducting auto body repair operations was not informed and trained on the hazards in using products including but not limited to BC Intermix, a product containing the hazardous chemical xylene, on or about September 15, 2015. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 C02 I
- Issued
- Dec 30, 2015
- Abate by
- Jan 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (a) Garage - Workers permitted to use Gerson 1730 N95 model filtering facepiece respirators while conducting various automobile repair operations, including but not limited to body repair, had not been provided Respiratory Protection Appendix D information, on or about September 15, 2015. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 811121)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340961432.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.