NEW RICHMOND, WI —
OSHA Inspection: UNIFIED SCREEN AND CRUSHING - WISCONSIN, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of UNIFIED SCREEN AND CRUSHING - WISCONSIN, INC. in 400 WISCONSIN DRIVE, NEW RICHMOND, WI 54017 (NAICS 332999). OSHA activity number 340963552.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNIFIED SCREEN AND CRUSHING - WISCONSIN, INC.
- Site address
- 400 WISCONSIN DRIVE
- City
- NEW RICHMOND
- State
- WI
- ZIP
- 54017
- Mailing
- 400 WISCONSIN DRIVE, NEW RICHMOND, WI 54017
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 13, 2015
- Abate by
- Apr 8, 2016
- Penalty
- Initial $3,850 · Current $2,118 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Crimper area; the employer did not have documented energy control procedures for machinery with more than one energy source such as the wire crimping machines.
Recent events (2)
- — I (S) $2118
- — Z (S) $3850
1910.147 C06 I
- Issued
- Nov 13, 2015
- Abate by
- Apr 8, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Crimper area; the employer did not conduct a periodic inspection of the energy control procedures used on the five wire crimping machines.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D03
- Issued
- Nov 13, 2015
- Abate by
- Apr 8, 2016
- Penalty
- Initial $5,390 · Current $2,964 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Crimping area; the employer did not require the operators to disconnect the electric, hydraulic, and pneumatic energy sources on the five crimping machines prior to conducting production set-up and servicing activities.
Recent events (2)
- — I (S) $2964
- — Z (S) $5390
1910.147 D04 I
- Issued
- Nov 13, 2015
- Abate by
- Apr 8, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Crimping area; the employer did not require the operators to affix lockout devices to the energy sources on the five crimping machines prior to conducting production set-up, alignment and servicing tasks.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A02
- Issued
- Nov 13, 2015
- Abate by
- Apr 8, 2016
- Penalty
- Initial $5,390 · Current $2,964 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: (a) Crimping Area; operators were exposed to the ingoing nip points on the wire crimping wheels and the moving part in the crimping machines wire cutters due to hinged covers that were easily opened and bypassed during operations.
Recent events (2)
- — I (S) $2964
- — Z (S) $5390
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340963552.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.