HADLEY, MA —
OSHA Inspection: BEAN MANAGEMENT, LLC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BEAN MANAGEMENT, LLC. in 397 RUSSELL RD, HADLEY, MA 01035 (NAICS 811111). OSHA activity number 340966241.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEAN MANAGEMENT, LLC.
- Site address
- 397 RUSSELL RD
- City
- HADLEY
- State
- MA
- ZIP
- 01035
- Mailing
- 397 RUSSELL RD, HADLEY, MA 01035
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 6
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 30, 2015
- Abate by
- Jan 7, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm in that employees were exposed to crushing hazards while working under automotive lifts with defective or missing components. Service Bay, 379 Russell Road, Hadley, MA 01035; Employees were required to work under and/or adjacent to extended automotive lifts with defective or missing components and that had not been inspected or maintained, exposing them to crushing hazards. The following automotive lifts were in use with defective or missing components: On or about October 9, 2015 and at times prior: (a) Rotary Lift in Bay #4 had worn cables, a cocked sheave pin, and cables were rubbing on a cylinder bracket creating a hazard. (b) Rotary Portable Car Lift Model PAL-5E hydraulic car lift (aka the Half Lift) in Bay #5 had a non-approved modification (a bolt) to the locking leg latch handle which required employees to reach through the lift in order to lower it. The lift frame guide on which the locking leg engages was bent and uneven, requiring employees to continually reset the locking leg into position while the lift descended. (c) O.ME.R. s.p.a. Viva 36 hydraulic car lift (aka the Alignment Lift) in Bay #6 had safety locks bypassed and lift was leaking hydraulic oil to the point where hydraulic pressure could not be maintained. Among other methods, one feasible and acceptable means of abatement includes, but is not limited to, following the American National Standards Institute\ Automotive Lift Institute Standard for Automotive Lifts- ANSI\ALI ALOIM-2008 (R2013) Safety Requirements for Operation, Inspection and Maintenance including but not limited to: (a) Paragraph 4.2 Operation- Ensure operators are trained in the proper methods to inspect the lifts safely. (b) Paragraph 4.4 Operator Responsibilities - In accordance with Section 4.4.4 ensure lift inspections are conducted daily. (c) Paragraph 4.5 Operator Reporting - As specified by this paragraph the lift is not to be operated until the cause of the problem as been determined and appropriate repairs have been made by qualified automotive lift personnel. (d) Paragraph 5.1 - Ensure inspections by a qualified inspector are conducted in accordance with the manufacturer's specifications. (e) Section 6, Perform planned and repair maintenance in accordance with this section. (f) Section 8, Damaged and/or unserviceable parts are replaced with parts approved by the original equipment manufacturer or with meeting original manufacturer specifications.
Recent events (1)
- — Z (S) $0
1910.22 A01
- Issued
- Dec 30, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 9, 2015 employees were exposed to hazards from oil spills in the service bay and from maintenance/work areas that were not kept clean and orderly.
Recent events (1)
- — Z (S) $0
1910.23 A08 II
- Issued
- Dec 30, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(a)(8)(ii): A floor hole cover of standard strength and construction was not in place and the floor hole was not constantly attended by someone or protected by a removable standard railing. Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 9, 2015 employees were exposed to hazards created by a floor hole in the service area with an unsecured cover on to which an employee could step.
Recent events (1)
- — Z (S) $0
1910.37 B02
- Issued
- Dec 30, 2015
- Abate by
- Jan 13, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 19, 2015 the exterior exit on the back wall of the service area was not marked by a sign reading "Exit"
Recent events (1)
- — Z (S) $0
1910.37 B05
- Issued
- Dec 30, 2015
- Abate by
- Jan 13, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit must be marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g., closet). Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 19, 2015 the restroom along an exit access was not marked "Not an Exit" or similar designation, or identified by a sign indicating its actual use (e.g., restroom).
Recent events (1)
- — Z (S) $0
1910.157 E03
- Issued
- Dec 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 19, 2015 fire extinguishers were not subjected to an annual maintenance check: (a) Near the strut spring compressor the KIDDE ABC extinguisher displayed a 2012 annual inspection. (b) Near the mechanics station the AMEREX ABC extinguisher displayed a 2012 annual inspection and the pin had been removed.
Recent events (1)
- — Z (S) $0
1910.303 G02 I
- Issued
- Dec 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 19, 2015 the cover plate for the light switch leading to the stairwell to the second floor was broken and half was missing thereby exposing live electrical parts while the light switch was active/on.
Recent events (1)
- — Z (S) $0
1910.1200 E01 I
- Issued
- Dec 30, 2015
- Abate by
- Mar 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The written hazard communication program did not include a list of the hazardous chemicals known to be present, using an identity that was referenced on the appropriate material safety data sheet: Service Bay, 397 Russell Road, Hadley, MA 01035 The chemical inventory provided by the employer, dated July 7, 1999 did not include hazardous chemicals known to be present, using an identity that was referenced on the appropriate material safety data sheet.
Recent events (1)
- — Z (S) $0
1910.1200 H01
- Issued
- Dec 30, 2015
- Abate by
- Mar 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: Service Bay, 397 Russell Road, Hadley, MA 01035; The employer did not train employees regarding the new label elements and safety data sheets format by December 1,2013.
Recent events (1)
- — Z (S) $0
1910.132 D01
- Issued
- Dec 30, 2015
- Abate by
- Jan 13, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipmentidentified in the hazard assessment: Service Bay, 397 Russell Road, Hadley, MA 01035; On or about October 9, 2015 the hazard assessment provided by the employer as a part of the employee handbook did not necessitate the use of Personal Protective Equipment even though eye, skin and foot hazards were present in the workplace.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 811111)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340966241.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.