EAST SAINT LOUIS, IL —
OSHA Inspection: MME HOLDINGS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MME HOLDINGS LLC in 510 MARTIN LUTHER KING DR., EAST SAINT LOUIS, IL 62201 (NAICS 445210). OSHA activity number 340985043.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MME HOLDINGS LLC
- Site address
- 510 MARTIN LUTHER KING DR.
- City
- EAST SAINT LOUIS
- State
- IL
- ZIP
- 62201
- Mailing
- 510 MARTIN LUTHER KING DR., EAST SAINT LOUIS, IL 62201
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445210
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: The employer did not develop an energy control (lockout/tagout) for employees servicing the Butcher Boy band saw and Hobart meat grinder.
Recent events (3)
- — F (S) $800
- — C (S) $2000
- — Z (S) $2000
1910.212 A03 II
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,800 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: Employees were operating the Butcher Boy #6-10754 without properly adjusting the guard to cover the unused portion of the blade.
Recent events (3)
- — F (S) $1120
- — C (S) $2800
- — Z (S) $2800
1910.303 B01 II
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: In the cooler the following equipment was not free from recognized hazards: a. A Outer semi-rigid conduit and electrical insulation on the disconnect labeled condenser 1 was broken exposing live electrical. b. A metal electrical outlet box between the band saw and meat grinder was separated from the rigid metal conduit.
Recent events (3)
- — F (S) $800
- — C (S) $2000
- — Z (S) $2000
1910.303 B07 IV
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Electrical equipment had damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating: The Hobart meat grinder controls to power on and off the equipment were broken, employees were using the disconnect to it turn on and off.
Recent events (3)
- — F (S) $800
- — C (S) $2000
- — Z (S) $2000
1910.305 B01 II
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: In the cooler knockouts were missing on the following disconnect boxes: a. 240VAC disconnect box powering the Butcher Boy band saw. b. 240VAC disconnect box powering the Hobart meat grinder.
Recent events (3)
- — F (S) $800
- — C (S) $2000
- — Z (S) $2000
1910.305 B02 I
- Issued
- Nov 5, 2015
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,800 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: The following boxes did not have a cover, faceplate, or fixture canopy. a. Electrical boxes mounted on the wall behind the Butcher Boy band saw. b. An metal outlet box used to turn on and off lighting in the freezer. c. Metal outlet box with receptacles between the band saw and the meat grinder.
Recent events (3)
- — F (S) $1120
- — C (S) $2800
- — Z (S) $2800
More inspections in this industry (NAICS 445210)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340985043.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.