TAMPA, FL —
OSHA Inspection: ANCHOR MACHINE & FABRICATING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ANCHOR MACHINE & FABRICATING, INC. in 3905 EAST 7TH AVE., TAMPA, FL 33605 (NAICS 332710). OSHA activity number 340986504.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANCHOR MACHINE & FABRICATING, INC.
- Site address
- 3905 EAST 7TH AVE.
- City
- TAMPA
- State
- FL
- ZIP
- 33605
- Mailing
- 3905 EAST 7TH AVE., TAMPA, FL 33605
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Nov 9, 2015
- Abate by
- Dec 7, 2015
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. In the machine shop, employees were exposed to struck by and amputation hazards, in that, the Bridgeport SN # 267 and the Lagun Republic FTV 2S drill presses were not guarded while drilling holes into metal, on or about 10/15/2015.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.215 A04
- Issued
- Nov 9, 2015
- Penalty
- Initial $1,020 · Current $612 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. In the machine shop, employees were exposed to a struck by hazard, in that, while sharpening tools and drill bits on the Ballador abrasive wheel grinder SN # G737244, the work rest was at 1/2 inch, on or about 10/15/2015.
Recent events (2)
- — I (S) $612
- — Z (S) $1020
1910.215 B09
- Issued
- Nov 9, 2015
- Abate by
- Dec 7, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The Tongue Guard for the grinding machine is not to be a distance greater than 1/4"inch away from the abrasive wheel. a. In the machine shop employees were exposed to a struck by hazard, in that while grinding metal parts and drill bits the Ballador abrasive wheel grinder SN # G737244 and the Reliance abrasive wheel grinder SN # P18J72E did not have tongue guards, on or about 10/15/2015.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.132 D02
- Issued
- Nov 9, 2015
- Abate by
- Dec 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a. At the establishment, the employer did not have a written assessment of the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE), on or about 10/15/2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340986504.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.