LONG ISLAND CITY, NY —
OSHA Inspection: AERO ELECTRIC CORP
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of AERO ELECTRIC CORP in 3100 47TH AVE, LONG ISLAND CITY, NY 11101 (NAICS 238210). OSHA activity number 340997071.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AERO ELECTRIC CORP
- Site address
- 3100 47TH AVE
- City
- LONG ISLAND CITY
- State
- NY
- ZIP
- 11101
- Mailing
- 159 ELDRIDGE ST, NEW YORK, NY 10002
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238210
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Nov 4, 2015
- Abate by
- Nov 17, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about October 19, 2015- job site at 3100 47th Ave, Long Island City, NY 11101 the employer permitted an employee to work on an active construction site without a protective helmet. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.403 B01 I
- Issued
- Nov 4, 2015
- Abate by
- Nov 17, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose: On or about October 19, 2015- job site at 3100 47th Ave, Long Island City, NY 11101 the employer permitted employees to use a metal outlet box, designed to be mounted on a wall, as a portable pendant. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.404 B01 II
- Issued
- Nov 4, 2015
- Abate by
- Nov 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupers for personal protection: On or about October 19, 2015- job site at 3100 47th Ave, Long Island City, NY 11101 the employer permitted employees to use a Milwaukee Sawzall to cut electrical conduit without GFCI protection. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.405 G02 III
- Issued
- Nov 4, 2015
- Abate by
- Nov 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap: On or about October 19, 2015- job site at 3100 47th Ave, Long Island City, NY 11101 the employer permitted employees to use a Milwaukee Sawzall, to cut metallic electrical conduit, that was powered by an improperly spliced flexible cord set. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B04 II
- Issued
- Nov 4, 2015
- Abate by
- Nov 17, 2015
- Penalty
- Initial $2,800 · Current $1,600 Reduced
General-duty citation text
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes (including skylights) by covers: On or about October 19, 2015- job site at 3100 47th Ave, Long Island City, NY 11101 the employer permitted employees to work on a floor with at least 10 unguarded floor holes. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1600
- — Z (S) $2800
More inspections in this industry (NAICS 238210)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340997071.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.