NILES, IL —
OSHA Inspection: MIGUEL RIVAS DBA BEYOND MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL RIVAS DBA BEYOND MASONRY, INC. in 7247 N. WAUKEGAN RD., NILES, IL 60714 (NAICS 238140). OSHA activity number 341001279.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL RIVAS DBA BEYOND MASONRY, INC.
- Site address
- 7247 N. WAUKEGAN RD.
- City
- NILES
- State
- IL
- ZIP
- 60714
- Mailing
- 23 HILL ROAD, FOX LAKE, IL 60020
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Nov 12, 2015
- Abate by
- Jan 29, 2016
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178: 29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) The employer did not train and evaluate employees operating the JLG - 55 A all-terrain forklift. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.100 A
- Issued
- Nov 12, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: a) Employees were not wearing protective helmets where there was a possible danger of head injury. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.451 E01
- Issued
- Nov 12, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access: a) Employees accessed tubular welded frame scaffold platform approximately 35 feet above the ground by climbing the ends of the scaffold frames that were not designed for such use. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.451 G01
- Issued
- Nov 12, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) Employees were exposed to the hazard of falling while performing masonry work from tubular welded frame scaffold platform elevated approximately 35 feet above the ground. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1926.454 A
- Issued
- Nov 12, 2015
- Abate by
- Jan 29, 2016
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: a) Employer did not provide training to each employee in order to recognize hazards associated with working from tubular welded frame scaffolding and to understand procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341001279.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.