LITTLE CHUTE, WI —
OSHA Inspection: RESOURCE ONE INTERNATIONAL LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of RESOURCE ONE INTERNATIONAL LLC in 225 BOHM DR, LITTLE CHUTE, WI 54140 (NAICS 561910). OSHA activity number 341024933.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RESOURCE ONE INTERNATIONAL LLC
- Site address
- 225 BOHM DR
- City
- LITTLE CHUTE
- State
- WI
- ZIP
- 54140
- Mailing
- 225 BOHM DR., LITTLE CHUTE, WI 54140
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561910
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 P01
- Issued
- Dec 4, 2015
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a) On or about October 27, 2015, during driving activities, the employer did not ensure that powered industrial trucks found to be unsafe due to large pieces of rubber missing in the tires and large cracks had been taken out of service and been restored to a safe operating condition.
Recent events (2)
- — I (O) $2082.5
- — Z (S) $2975
1910.178 Q06
- Issued
- Dec 4, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(6): Powered industrial trucks were altered so that the relative positions of the various parts were different from what they were when originally received from the manufacturer, by the addition of extra parts not provided by the manufacturer, or by the elimination of any parts without the manufacturer's approval: a) On or about October 27, 2015, during inspection activities, the employer did not ensure that the Hyster Power Industrial Vehicle Model #120, Company #2 had the correct tire for the rim from when it was first originally received from the manufacturer.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Dec 4, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were being placed in services after the examination showed condition(s) adversely affecting the safety of the vehicle: a) On or about October 27, 2015, during inspection activities, the employer did not ensure the that powered industrial vehicles after being examined at the beginning of every work shift were taken out of service when the The Hyster Power Industrial Vehicle Model #50, Company #14 showed tire damage on the left back tire and the right back tire. b) On or about October 27, 2015, during inspection activities, the employer did not ensure the that powered industrial vehicles after being examined at the beginning of every work shift were taken out of service when the Hyster Power Industrial Vehicle Model #120, Company #2 showed tire damage on the right back, left back and front left tires. c) On or about October 27, 2015, during inspection activities, the employer did not ensure the that powered industrial vehicles after being examined at the beginning of every work shift were taken out of service when the Hyster Power Industrial Vehicle Model #50, Company #3 showed tire damage on the left back and the right back tire.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A01
- Issued
- Dec 4, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about September 23, 2015, during start up activities, the employer did not ensure that a guard was installed on the waste conveyor belt on the Sheeter #4 machine to prevent employees from contacting the in going nip points on the conveyor belt. b) On or about September 23, 2015, during start up activities, the employer did not ensure that a guard was installed on the waste conveyor belt on the Sheeter #5 machine to prevent employees from contacting the in going nip points on the conveyor belt. c) On or about September 23, 2015, during start up activities, the employer did not ensure that a guard was installed underneath the reject gate on Sheeter #4 where there are 12 moving conveyor belts to prevent employees from contacting the in going nip points. d) On or about September 23, 2015, during start up activities, the employer did not ensure that a guard was installed underneath the reject gate on Sheeter #5 where there are 12 moving conveyor belts to prevent employees from contacting the in going nip points.
Recent events (2)
- — I (O) $2082.5
- — Z (S) $2975
1910.212 A03 III
- Issued
- Dec 4, 2015
- Abate by
- Jan 27, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: a) On or about September 23, 2015, during start up activities, the employer did not ensure that hand tools were provided to employees to prevent them from contacting the in going nip points as they were removing the paper under the reject gate on the Sheeter #4 machine. b) On or about September 23, 2015, during start up activities, the employer did not ensure that hand tools were provided to employees to prevent them from contacting the in going nip points as they were removing the paper under the reject gate on the Sheeter #5 machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Resource ONE International LLC
View Resource ONE International LLC's full OSHA safety record →
More inspections in this industry (NAICS 561910)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341024933.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.