Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: B & S WELDING SERVICES

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of B & S WELDING SERVICES in 100 HILLCREST, OPP, AL 36467 (NAICS 332999). OSHA activity number 341043487.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch B & S Welding Services — free Get an email when a new federal OSHA severe-injury report for B & S Welding Services is published. One employer, no account, unsubscribe in one click.
Site address
100 HILLCREST
City
OPP
State
AL
ZIP
36467
Mailing
100 HILLCREST, OPP, AL 36467
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
4
Ownership type
A

8 citations on file for this inspection.

1910.253 B02 II

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 15, 2015
Penalty
Initial $1,600 · Current $1,125 Reduced
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons:   a)B & S Welding Service:  On or about November 3rd, 2015 and prior to, employee(s) were exposed to explosion and struck-by hazards from compressed oxygen tanks, mixed welding gas and acetylene tanks being stored and not secured from being knocked over.
Recent events (2)
  • — I (S) $1125
  • — Z (S) $1600

1910.253 B02 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 15, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:  a)B & S Welding Service:  On or about November 3rd, 2015 and prior to, employee(s) were exposed to explosion and struck-by hazards from compressed oxygen tanks, mixed welding gas and acetylene tanks that did not have valve protection cap on stored full tanks exposing employees to explosion and fire hazards while changing tanks out.   Compressed Gas Association Pamphlet G-1-1966, 4.2.8 states Valve protection for in the design, should be mechanically attached except when cylinders are in actual use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 15, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half hour.    a)B & S Welding Service:  On or about November 3rd, 2015 and prior to, employee(s) were exposed to explosion and struck-by hazards from compressed oxygen tanks, mixed welding gas and acetylene tanks being stored next to each other.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.254 B04 IV

Serious Gravity 5 2 instances 2 exposed
Issued
Dec 15, 2015
Penalty
Initial $1,600 · Current $1,125 Reduced
29 CFR 1910.254(b)(4)(iv): Terminals for welding leads were not protected from accidental contact by personnel or metal objects:   a)  Miller welder #1:   On or about November 3rd, 2015 the employer exposed employee(s) to electrical shock, burns and electrocution hazards from unguarded or uncovered welding leads from the working and electrode leads connected to Miller  480 volt welder machine.   b)  Lincoln welder #1:   On or about November 3rd, 2015 the employer exposed employee(s) to electrical shock, burns and electrocution hazards from unguarded or uncovered welding leads from the working and electrode leads connected to Lincoln 480 volt welder machine.
Recent events (2)
  • — I (S) $1125
  • — Z (S) $1600

1910.1200 E01

Other-than-serious 1 instance 2 exposed
Issued
Dec 15, 2015
Abate by
Dec 23, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 0070X100

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)Facility wide:  On or about November 3rd, 2015, and prior to, the employer exposed employees to chemicals without implementing a written Hazard Communication Program and exposed employee to chemicals including but not limited to: Compressed oxygen gas cylinders, compressed mixed gas cylinders, compressed acetylene gas cylinders and Lucas Heavy Duty Oil Stabilizer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01 I

Other-than-serious 1 instance 2 exposed
Issued
Dec 15, 2015
Abate by
Dec 23, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 0070X100

29 CFR 1910.1200(e)(1)(i): The written hazard communication program did not include a list of the hazardous chemicals known to be present, using an identity that was referenced on the appropriate material safety data sheet:   a)Facility wide:  On or about November 3rd, 2015, and prior to, the employer exposed employees to chemicals with out maintaining a Chemical Inventory List or list hazardous chemicals including but not limited to: Compressed oxygen gas cylinders, compressed mixed gas cylinders, compressed acetylene gas cylinders and Lucas Heavy Duty Oil Stabilizer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 2 exposed
Issued
Dec 15, 2015
Abate by
Dec 23, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 0070X100

29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace:   a)B & S Welding Services:  On or about November 3rd, 2015, and prior to, the employer exposed employees to chemicals without maintaining Safety Data Sheets (SDS) hazardous chemicals including but not limited to: Compressed oxygen gas cylinders, compressed mixed gas cylinders, compressed acetylene gas cylinders and Lucas Heavy Duty Oil Stabilizer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 2 exposed
Issued
Dec 15, 2015
Abate by
Dec 23, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 0070X100

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a)B & S Welding Services:  On or about November 3rd, 2015 and prior to, initial training on a written hazard communication program was not documented for employee(s) exposed to hazards including but not limited to: Compressed oxygen gas cylinders, compressed mixed gas cylinders, compressed acetylene gas cylinders and Lucas Heavy Duty Oil Stabilizer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341043487.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.