CORFU, NY —
OSHA Inspection: YANCEYS FANCY INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of YANCEYS FANCY INC. in 857 MAIN RD., CORFU, NY 14036 (NAICS 424430). OSHA activity number 341050516.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YANCEYS FANCY INC.
- Site address
- 857 MAIN RD.
- City
- CORFU
- State
- NY
- ZIP
- 14036
- Mailing
- 857 MAIN RD., CORFU, NY 14036
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424430
- Employees
- 156
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Jan 13, 2016
- Abate by
- Feb 13, 2016
- Penalty
- Initial $3,600 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) On or about 11/10/15 throughout the facility; employer failed to protect employees from caught between hazards when the last periodic inspection of their energy control procedures, such as but not limited to, Vac Sealer 8610, De-Moulder #41316, Curd Machine, was conducted in 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2250
- — Z (S) $3600
1910.147 C07 I A
- Issued
- Jan 13, 2016
- Abate by
- Feb 29, 2016
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation a) On or about 11/10/15 throughout the facilities; employer failed to protect employees from caught on or between hazards when they did not provided the required hazardous energy training to those involved in service and maintenance activities of equipment such as but not limited to,Vac Sealer 8610, De-Moulder #41316, Curd Machine, Whey Separator. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2250
- — Z (S) $4500
1910.212 A03 II
- Issued
- Jan 13, 2016
- Penalty
- Initial $3,600 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) On or about 11/10/15 at the Main Road facility in the Processing room; employer failed to protect employees who removed the cheese from the bottom chute of the cheese shredder from the caught between hazard of the rotating shredding wheel when the guard opening was 4.5 inches and the distance to the point of operation was six inches. b) On or about 11/05/15 in the Natural Cheese area; employer failed to protect employees working near the rotating butter churn (300 gallon horizontal drum) from the caught between hazards created by the protrusions (hatch handle and fill nozzle) on the churn and the stationary guard. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2250
- — Z (S) $3600
1910.212 A04
- Issued
- Jan 13, 2016
- Abate by
- Feb 13, 2016
- Penalty
- Initial $3,600 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(4): Revolving drum(s), barrel(s), or container(s) were not guarded by enclosure(s) which were interlocked with the drive mechanism so that the barrel(s), drum(s), or container(s) could not revolve unless the enclosure(s) were in place: a) On or about 01/08/16 in the Natural Cheese area; employer failed to protect employees from the caught between hazard of the rotating butter churn when it was possible to operate the churn ( 300 gallon horizontal drum ) with the top guard in the raised or open position. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2250
- — Z (S) $3600
More inspections at Yanceys Fancy INC.
View Yanceys Fancy INC.'s full OSHA safety record →
More inspections in this industry (NAICS 424430)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341050516.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.