Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BII CORP.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BII CORP. in 900 74TH ST., NORTH BERGEN, NJ 07047 (NAICS 315210). OSHA activity number 341056901.

Watch BII Corp. — free Get an email when a new federal OSHA severe-injury report for BII Corp. is published. One employer, no account, unsubscribe in one click.
Establishment
BII CORP.
Site address
900 74TH ST.
City
NORTH BERGEN
State
NJ
ZIP
07047
Mailing
900 74TH ST., NORTH BERGEN, NJ 07047
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
315210
Employees
300
Ownership type
A

8 citations on file for this inspection.

1910.36 D01

Serious Gravity 5 2 instances 100 exposed
Issued
Penalty
Initial $6000.00 · Current $3900.00 Reduced
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:  a) 2nd Floor  Employees worked in area where emergency exit door hardware must be twisted prior to opening.  b) 1st Floor  Employees worked in area where emergency exit door hardware must be twisted prior to opening.  Violation observed on or about 11/3/2015.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $6000

1910.37 A03

Serious Gravity 10 2 instances 200 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $4550.00 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a) 2nd floor- work stations Employees worked at sewing stations with restricted egress. The work stations were configured in such a manner that restricted emergency egress.  b) 1st floor - work stations Employees worked at sewing stations with restricted egress. The work stations were configured in such a manner that restricted emergency egress.  Violation observed on or about 11/13/2015
Recent events (2)
  • — I (S) $4550
  • — Z (S) $7000

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $5000.00 · Current $3250.00 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) Establishment   Employees operated the fork truck without training/certification.  Violation occurred on or about 11/13/2015.
Recent events (2)
  • — I (S) $3250
  • — Z (S) $5000

1910.215 A02

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $5000.00 · Current $3250.00 Reduced
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:  (a) 2nd Floor  Employees sharpened screw drivers on an abrasive wheel with an unguarded spindle end & nut.  Violation occurred on or about 10/13/2015.
Recent events (2)
  • — I (S) $3250
  • — Z (S) $5000

1910.215 A04

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $4000.00 · Current $2600.00 Reduced
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:  (a) 2nd Floor  Employees sharpened screw drivers on an abrasive wheel without work rests.  Violation occurred on or about 10/13/2015.
Recent events (2)
  • — I (S) $2600
  • — Z (S) $4000

1910.219 A03

Serious Gravity 10 2 instances 200 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $4550.00 Reduced
29 CFR 1910.219(a)(3): The sides and face sections nip points of the drive belt(s) and pulley(s) of textile machinery were not guarded by a guard which extended at least six inches beyond the rim of the pulley on the in-running and off-running sides of  the belt and at least two (2) inches away from the rim and face of the pulley in all other directions:  Employees sewed military garments with various unguarded sewing machines, including but not limited to the machines below:  a) 2nd Floor Employees sewed garments with a Juki sewing machine without a guarded drive belt & pulley under the sewing table.  b) 2nd Floor Employees sewed garments with Juki sewing machine without a guarded drive belt & pulley.  c) 1st Floor Employees sewed garments with Juki sewing machine DDL-5550-6 without a guarded drive belt & pulley.   Violations observed on or about 11/13/2015.
Recent events (2)
  • — I (S) $4550
  • — Z (S) $7000

1910.305 B01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $4000.00 · Current $2600.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:   a) 1st Floor   Employees turned on power for lights & sewing machines from two electrical panels with open, unused breaker spaces and an uncovered knock-out hole.  Violations observed on or about 11/13/2015
Recent events (2)
  • — I (S) $2600
  • — Z (S) $4000

1910.141 D02 II

Other-than-serious 1 instance 200 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.141(d)(2)(ii): Lavatories were not provided with hot and cold, or tepid running water:  a) 1st floor women's lavatory  Employees were unable to adequately wash their hands after use of the lavatory.  Violation observed on or about 11/13/2015
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341056901.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.