MOUNT VERNON, NY —
OSHA Inspection: SPECIALTY CONSTRUCTION SYSTEM, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SPECIALTY CONSTRUCTION SYSTEM, INC. in 100 PEARL STREET, MOUNT VERNON, NY 10550 (NAICS 238120). OSHA activity number 341064210.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECIALTY CONSTRUCTION SYSTEM, INC.
- Site address
- 100 PEARL STREET
- City
- MOUNT VERNON
- State
- NY
- ZIP
- 10550
- Mailing
- 100 PEARL STREET, MOUNT VERNON, NY 10550
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 50
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.101 B
- Issued
- Mar 29, 2016
- Abate by
- Nov 21, 2016
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: a) Shop Area: An oxygen cylinder was not secured to a hand truck when it was moved from a storage area to a fabrication area on or about 12/8/15.
Recent events (3)
- — F (O) $1000
- — C (S) $2800
- — Z (S) $2800
1910.133 A01
- Issued
- Mar 29, 2016
- Abate by
- Oct 20, 2016
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from potentially injurious light radiation: a) Shop Area: The employer did not ensure that employees observing oxygen-acetylene cutting wore appropriate eye protection (e.g., appropriately shaded goggles or equivalent); on or about 12/8/15.
Recent events (3)
- — F (O) $1000
- — C (S) $2800
- — Z (S) $2800
1910.252 B02 III
- Issued
- Mar 29, 2016
- Abate by
- Nov 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not required to wear appropriate goggles to protect them from the rays when noncombustible or flameproof screens or shields were not used to enclose the welding operation: a) Shop Area: The MIG welding operation was not enclosed by flameproof screens or shields and workers adjacent to the welding area were not required to wear appropriate goggles (e.g., shaded goggles or equivalent); on or about 12/8/15.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 C01 V
- Issued
- Mar 29, 2016
- Abate by
- May 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1)(v): The written program did not contain procedures and schedules for cleaning, disinfecting, storing, inspecting, repairing, discarding, and otherwise maintaining respirators: a) Shop Area: Employees performing MIG welding and torch cutting were required to wear half-face air purifying respirators with P100 cartridges and the employer did not develop a written respiratory protection program which included procedures and schedules for cleaning, disinfecting, storing, inspecting, repairing, discarding, and otherwise maintaining respirators:on or about 11/16/16.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.134 C01 IX
- Issued
- Mar 29, 2016
- Abate by
- May 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1)(ix): The written respiratory protection program did not contain procedures for regularly evaluating the effectiveness of the program: a) Shop Area: Employees performing MIG welding and torch cutting were required to wear half-face air purifying respirators with P100 cartridges and the employer did not develop a written respiratory protection program which included procedures for regularly evaluating the effectiveness of the program; on or about 11/16/15.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Specialty Construction System, INC.
View Specialty Construction System, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341064210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.