HASTINGS, NE —
OSHA Inspection: CENTURION INDUSTRIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTURION INDUSTRIES INC. in 2801 E 7TH ST., HASTINGS, NE 68901 (NAICS 238120). OSHA activity number 341064301.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTURION INDUSTRIES INC.
- Site address
- 2801 E 7TH ST.
- City
- HASTINGS
- State
- NE
- ZIP
- 68901
- Mailing
- P.O. BOX 531, FREDONIA, KS 66736
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 57
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.1053 B02
- Issued
- Mar 9, 2016
- Abate by
- Mar 30, 2016
- Penalty
- Initial $7,000 · Current $6,000 Reduced
General-duty citation text
29 CFR 1926.1053(b)(2): Ladder(s) were not maintained free of oil, grease, or other slipping hazards: The employer was failing to protect its employees from a slip and fall hazard on the step ladder due to buildup of mud on the steps. The step ladder was being used in adjacent to a guard rail exposing the employee using the ladder to a fall of greater than 6 feet.
Recent events (2)
- — I (S) $6000
- — Z (S) $7000
1926.1053 B13
- Issued
- Mar 9, 2016
- Abate by
- Mar 30, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: The employer was failing to ensure that the employee(s) were not exposed to a fall hazard of approximately 11 feet. An employee was assigned the task of removing a steel member during this process the employee stood on the top step and the cross member in the performance of this task.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B14
- Issued
- Mar 9, 2016
- Abate by
- Mar 30, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(14): Cross-bracing, not designed for climbing, on the rear section of a stepladder was used for climbing: The employer was failing to ensure that the employee(s) were not exposed to a fall hazard of approximately 11 feet. An employee was assigned the task of removing a steel member during this process the employee stood on the cross member in the performance of this task.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1060 A01 III
- Issued
- Mar 9, 2016
- Abate by
- Apr 20, 2016
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1060(a)(1)(iii): The employer did not ensure that each employee using ladders and stairways had been trained by a competent person in the proper construction, use, placement, and care in handling of all stairways and ladders: The employer was failing to ensure that employees were protected from a fall hazard in that the employees were not trained in accordance with this subpart. Specifically - An employee was involved in a fall from a step ladder with muddy steps and standing on the top step and cross member (straddling the ladder). Employee fell approximately 11 feet to the ground below.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1904.29 B01
- Issued
- Mar 9, 2016
- Abate by
- Mar 30, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(b)(1): A log of all recordable work-related injuries and illness (OSHA Form 300 or equivalent) was not completed in the detail required by the regulation. At the facility the employer is failing complete the OSHA 300 form or its equivalent with sufficient detail in that entries in block F did not describe the specific injury/illness that occurred, part of body affected or the object/substance that directly injured or made the person ill.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Centurion Industries INC.
View Centurion Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341064301.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.