BINGHAMTON, NY —
OSHA Inspection: JRC CONTRACTING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JRC CONTRACTING, INC. in 80 - 88 EXCHANGE STREET, BINGHAMTON, NY 13901 (NAICS 238390). OSHA activity number 341069870.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JRC CONTRACTING, INC.
- Site address
- 80 - 88 EXCHANGE STREET
- City
- BINGHAMTON
- State
- NY
- ZIP
- 13901
- Mailing
- PO BOX, BINGHAMTON, NY 13903
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238390
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.303 B01
- Issued
- Feb 24, 2016
- Abate by
- Mar 1, 2016
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d): a) At the worksite, on or about 11/3/15: Workers were using a hand grinder without a guard. Abatement certification must be submitted for this item.
Recent events (1)
- — Z (S) $2400
1926.304 H01
- Issued
- Feb 24, 2016
- Abate by
- Mar 1, 2016
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a) At the worksite, on or about 11/3/15: Workers were using a Hitachi Table Saw without a guard. Abatement certification must be submitted for this item.
Recent events (1)
- — Z (S) $1600
1926.304 F
- Issued
- Feb 24, 2016
- Abate by
- Mar 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed crosscut/rip saws did not have non-kickback fingers on dogs so located as to oppose the kickback of material: a) At the worksite, on or about 11/3/15: Workers were using a Hitachi Table Saw without a guard and without a non-kickback device. Abatement certification must be submitted for this item.
Recent events (1)
- — Z (S) $0
1926.350 A11
- Issued
- Feb 24, 2016
- Abate by
- Mar 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.350(a)(11): Cylinders were not stored in definitely assigned storage places where the cylinders would not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: a) At the jobsite, on or about 11/3/15: Employees were working in and around an area where a compressed gas cylinder was stored upright and without restraints to prevent being knocked over. Abatement certification must be submitted for this item.
Recent events (1)
- — Z (O) $0
1926.403 B01 I
- Issued
- Feb 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose. a) At the jobsite, on or about 11/3/15: Workers were using power tools energized via a power strip not designed for construction use.
Recent events (1)
- — Z (O) $0
1926.405 G02 IV
- Issued
- Feb 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) At the jobsite, on or about 11/3/15: Workers were using power tools energized via extension cords where those cords were pulled free of the plug.
Recent events (1)
- — Z (O) $0
More inspections at JRC Contracting, INC.
View JRC Contracting, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238390)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341069870.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.