Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: STRAIGHT EDGE STRIPING, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of STRAIGHT EDGE STRIPING, LLC. in 316 MEDFORD LAKES ROAD, TABERNACLE, NJ 08088 (NAICS 237310). OSHA activity number 341085298.

Watch Straight Edge Striping, LLC. — free Get an email when a new federal OSHA severe-injury report for Straight Edge Striping, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
316 MEDFORD LAKES ROAD
City
TABERNACLE
State
NJ
ZIP
08088
Mailing
223 EAST MAIN STREET, BOUND BROOK, NJ 08805
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237310
Employees
45
Ownership type
A

3 citations on file for this inspection.

1926.21 B02

Deleted Repeat Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $10780.00 · Current $0.00 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury:   a)Both Travelled Ways Of The Two Lane Road On Medford Lakes Road, Tabernacle NJ: Employees involved with striping operations, and other related worksite activities, were not properly trained in the recognition and avoidance of hazards.  Condition noted on or about 11/23/15.   Straight Edge Striping, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR.1926.21(b)(2), which was contained in OSHA inspection number 315978965, citation number 1, item number 2 and was affirmed as a final order on August 9, 2012, with respect to a workplace located at Intersection of Haddon and Euclid Avenues, Haddonfield NJ.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $0
  • — C (R) $10780
  • — Z (R) $10780

1926.200 G01

Repeat Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $10780.00 · Current $7546.00 Reduced
29 CFR 1926.200(g)(1): Construction areas were not posted with legible traffic signs at points of hazards:     a)Both Travelled Ways Of The Two Lane Road On Medford Lakes Road, Tabernacle NJ: Employees performing striping operations, in the center of a two lane roadway, were exposed to struck by hazards when advanced warning signs were not in use on/along either direction of the traveled way.  Condition observed on or about 11/23/15.     Straight Edge Striping, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.200(g)(2) Section 6G.03of the MUTCD Millennium Edition Series, which was contained in OSHA inspection number 315978965, citation number 1, item number 4 and was affirmed as a final order on August 9, 2012, with respect to a workplace located at Intersection of Haddon and Euclid Avenues, Haddonfield NJ.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $7546
  • — C (R) $10780
  • — Z (R) $10780

1926.200 G01

Repeat Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.200(g)(1): Construction areas were not supplied with channelization devices during mobile operations as required by the (MUTCD) 1988 Edition Revision 3, Section 6C-2b:    a) Both Travelled Ways Of The Two Lane Road On Medford Lakes Road, Tabernacle NJ: Employees performing striping operations, in the center of a two lane roadway, were exposed to struck by hazards when the traffic was not channelized around the operations.  Condition observed on or about 11/23/15.     Straight Edge Striping, LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.200(g)(2) Section 6C.2 of the MUTCD Millennium Edition Series, which was contained in OSHA inspection number 315978965, citation number 1, item number 3 and was affirmed as a final order on August 9, 2012, with respect to a workplace located at Intersection of Haddon and Euclid Avenues, Haddonfield NJ.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $0
  • — C (R) $0
  • — Z (R) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341085298.