CUDAHY, WI —
OSHA Inspection: ARAMARK UNIFORM & CAREER APPAREL, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ARAMARK UNIFORM & CAREER APPAREL, LLC in 5350 SOUTH PENNSYLVANIA AVENUE, CUDAHY, WI 53110 (NAICS 333312). OSHA activity number 341091270.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Aramark Uniform & Career Apparel, LLC — free
Get an email when a new federal OSHA severe-injury report for Aramark Uniform & Career Apparel, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- ARAMARK UNIFORM & CAREER APPAREL, LLC
- Site address
- 5350 SOUTH PENNSYLVANIA AVENUE
- City
- CUDAHY
- State
- WI
- ZIP
- 53110
- Mailing
- 5350 SOUTH PENNSYLVANIA AVENUE, CUDAHY, WI 53110
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333312
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- May 24, 2016
- Abate by
- Jul 12, 2016
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to hazards associated with shipping dock leveling devices such as, but not limited to fall and struck-by hazards due to inadvertent collapse of manual dock leveling platforms resulting in head injury, broken bones and contusions: On or about December 1st, 2015 an employee was exposed to a fall and struck-by hazard while working on a manual dock leveling device placed on a service truck bed platform. The employer did not ensure that Dock Leveling Device Safety Requirements and Considerations were implemented: Dock Leveling Device Safety Requirements and Considerations - Owner Responsibility: (a) Employees were not trained on the recognition of the inherent danger of the interface between the dock and transport vehicle and safe use of the dock leveling devices (Manual Dock Plate). (b) Installation instructions for the manual dock leveling platforms were not developed and available. (c) Initial and periodic inspection procedures for the manual dock leveling platforms were not developed and available. (d) Maintenance procedures for the manual dock leveling platforms were not developed and implemented. (e) Operating procedures for the manual dock leveling platforms were not developed and implemented. (f) Tables to identify the grade (slope) for all variations of length and configuration of the manual dock leveling platform were not developed and implemented. (g) Information identifying the maximum uncontrolled drop of the manual dock leveling platform encountered upon sudden removal of support while within the working range of the equipment was not developed and implemented. (h) Safety systems to restrict the uncontrolled drop of the manual dock leveling platform were not developed and implemented.
Recent events (3)
- — F (S) $0
- — C (S) $7000
- — Z (S) $7000
1910.147 C07 I A
- Issued
- May 24, 2016
- Abate by
- Jul 12, 2016
- Penalty
- Initial $5,000 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: (a) Training was not provided to maintenance personnel and authorized personnel in the recognition of hazardous energy sources, the type of energy sources and practices and methods required to safely deenergize machines/equipment including but not limited to the Jensen L-tron Wash, Ellis Dryer, conveyors, and High Roller II machines.
Recent events (3)
- — F (S) $4000
- — C (S) $5000
- — Z (S) $5000
1910.147 C07 IV
- Issued
- May 24, 2016
- Abate by
- Jul 12, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: (a) Employer training conducted for affected employees was not documented as being accomplished. Affected employees perform work on or around the Jensen L-tron Wash, Ellis Dryer, conveyors, and High Roller II machines.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- May 24, 2016
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures are not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Written machine/equipment specific energy control procedures were not developed, documented, and utilized for authorized personnel to follow when performing maintenance, repair, set-up and other associated mechanical diagnostic procedures on but not limited to Jensen mat washer, Ellis mat dryer, High Roller II mat rolling machines, conveyors and garment transport conveyor.
Recent events (3)
- — F (S) $0
- — C (S) $5000
- — Z (S) $5000
1910.212 A01
- Issued
- May 24, 2016
- Abate by
- Jul 12, 2016
- Penalty
- Initial $6,000 · Current $6,000
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) High Roller II Machine, Serial Number 20110200: Employees that operate the High Roller II mat rolling machine are exposed to ingoing nip point created by the mat being rolled up and mechanical horizontal in-feed belts and vertical belts that feed the mat into the roller guide/former. (b) High Roller II Machine, Serial Number 20110300: Employees that operate the High Roller II mat rolling machine are exposed to ingoing nip point created by the mat being rolled up and mechanical horizontal in-feed belts and vertical belts that feed the mat into the roller guide/former.
Recent events (3)
- — F (O) $6000
- — C (S) $6000
- — Z (S) $6000
More inspections at Aramark Uniform & Career Apparel, LLC
Jan 5, 2024
HAYWARD, CA
Dec 5, 2023
SPARKS, NV
Aug 23, 2023
LA CROSSE, WI
Jul 26, 2022
ATLANTA, GA
Jan 21, 2021
OAKLAND, CA
View Aramark Uniform & Career Apparel, LLC's full OSHA safety record →
More inspections in this industry (NAICS 333312)
Jul 15, 2021
63967 - Green Earth Cleaners LLC · WESTWOOD, KY
Sep 14, 2020
Prudential Overall Supply · ROUND ROCK, TX
Jul 24, 2020
WA317960310 - Colmac Industries INC · COLVILLE, WA
Feb 28, 2020
Luar Cleaners · GUAYNABO, PR
Feb 25, 2020
Clean Rentals Incorporated · NEW BEDFORD, MA
More inspections in WI
Jul 17, 2026
PTS Contractors, INC. · GREEN BAY, WI
Jul 16, 2026
Miron Construction CO. INC. · WAUSAU, WI
Jul 15, 2026
Wabash National Services, L.P. · ELROY, WI
Jul 15, 2026
Kings Superior Construction LLC · SUSSEX, WI
Jul 15, 2026
Teronomy Builders, INC. · DELAVAN, WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341091270.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.