CUMMING, GA —
OSHA Inspection: RAUL CARRILLO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAUL CARRILLO in 3040 CAMERON CT, CUMMING, GA 30040 (NAICS 238130). OSHA activity number 341093334.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAUL CARRILLO
- Site address
- 3040 CAMERON CT
- City
- CUMMING
- State
- GA
- ZIP
- 30040
- Mailing
- 1367 WILLIAMSBURG LN, NORCROSS, GA 30093
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Jan 8, 2016
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about 12/1/15 located at 4030 Cameron Ct., Cumming, GA: Employees were framing the roof of a new house with lumber and ply wood as 2x8s were observed being swung overhead to the roof area. 2x8s scrap wood was observed being thrown to the ground as an employee was not provided a hard hat. Employees were without hard hats exposing them to a struck by hazards.
Recent events (1)
- — Z (S) $2400
1926.102 A01
- Issued
- Jan 8, 2016
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On or about 12/1/15 located at 4030 Cameron Ct., Cumming, GA: Employees were observed framing a house while using a pneumatic nail gun and the skill saw without safety glasses.
Recent events (1)
- — Z (S) $2800
1926.304 D
- Issued
- Jan 8, 2016
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about 12/1/15 located at 4030 Cameron Ct., Cumming, GA: Employees that were operating the skill saws used a piece of wood to wedge and hold the guard for the blade in the open position, while cutting 2x4s and plywood.
Recent events (1)
- — Z (S) $2800
1926.501 B13
- Issued
- Jan 8, 2016
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about 12/1/15 located at 4030 Cameron Ct., Cumming, GA: Employees were framing the 8/12 pitch roof, installing 2x8 rafters and ply wood on to the roof of the 3rd floor while working at the edge, the employer did not ensure that fall protection was used by the employees while exposed to fall hazards of approximately up to 45 feet.
Recent events (1)
- — Z (S) $2800
1926.1053 B01
- Issued
- Jan 8, 2016
- Abate by
- Feb 4, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about 12/1/15 located at 4030 Cameron Ct., Cumming, GA: Employees were exposed to fall hazards, while performing roofing work, employees were using a portable extension ladder to gain access to the 2nd floor, and the ladder was 2 inches below the landing surface.
Recent events (1)
- — Z (S) $2800
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341093334.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.