OSHA Inspection: RED LODGE MOUNTAIN RESORT

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $2,975 · Current $1,488 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    a) Building Maintenance Shop: On December 7, 2015 and at times prior, employees were exposed to amputation hazards while operating the unguarded Hitachi C10RA3 ten inch bench top table saw.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $2,100 · Current $1,050 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    a) Building Maintenance Shop: On or about December 7, 2015 and at time prior, employees were exposed to caught in hazards from the unguarded three inch pulley on the key making machine.    b) Building Maintenance Shop: On or about December 7, 2015 and at time prior, employees were exposed to caught in hazards from the unguarded two inch pulley on the key making machine.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  a) Building Maintenance Shop: On or about December 7, 2015 and at time prior, employees were exposed to caught in hazards from the unguarded belt on the key making machine.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $2,380 · Current $1,190 Reduced

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least:    a) RLM Maintenance Department: On or about December 7, 2015 and at times prior, employees were exposed to fire hazards from the non segregated storage of oxygen and acetylene cylinders.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $2,100 · Current $1,050 Reduced

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:    a) Building Maintenance Shop: On or about December 7, 2015 and at times prior, employees were exposed to shock hazards while using the Hitachi C10RA3 ten inch bench top table saw with a missing ground pin.    b) RLM Maintenance Department: On or about December 7, 2015 and at times prior, were exposed to shock hazards while using the yellow flexible extension cord with a missing ground pin.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  a) RLM Maintenance Department: On or about December 7, 2015 and at times prior, employees were exposed to shock hazards while accessing the electrical panel with an unused opening.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) RLM Maintenance Department: On or about December 7, 2015 and at times prior, Employees were exposed to shock hazards while using the 4-gang outlet with an extension cord wired into it to provide energy for the overhead lights.

Issued

Mar 31, 2016

Abate by

Apr 26, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:  a) RLM Maintenance Department: On or about December 7, 2015 and at times prior, the employer failed to ensure that strain relief was not compromised on a flexible extension cord used to energizing a block heater on a yellow road grader.