SAINT ANTHONY, ID —
OSHA Inspection: MOLDENHAUER, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MOLDENHAUER, INC. in 120 N BRIDGE, SAINT ANTHONY, ID 83445 (NAICS 444130). OSHA activity number 341106920.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOLDENHAUER, INC.
- Site address
- 120 N BRIDGE
- City
- SAINT ANTHONY
- State
- ID
- ZIP
- 83445
- Mailing
- 101 E MAIN STE 201, REXBURG, ID 83440
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 444130
- Employees
- 25
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 A04
- Issued
- Jan 11, 2016
- Abate by
- Feb 5, 2016
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) On or about December 8, 2015, and at times prior thereto, the forklift that the employer authorizes use of had a hole drilled on the left tyne of the forklifts. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.178 A06
- Issued
- Jan 11, 2016
- Abate by
- Feb 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all name-plates and markings were in place and maintained in a legible condition: (a) Job site: There was not a data plate on the forklift. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Jan 11, 2016
- Abate by
- Feb 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) The employer did not develop and/or implement a training program based on the general principles of safe truck operation, the types of vehicle(s) being used in the workplace, the hazards of the workplace created by the use of the vehicle(s), and the general safety requirements of the OSHA standard. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L03 I M
- Issued
- Jan 11, 2016
- Abate by
- Feb 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(3)(i)(M): Powered industrial truck operators did not receive initial training in the following topics to include but not limited to operating instructions, warnings, or precautions listed in the operators manual for the types of vehicle that the employee is being trained to operate: (a) On or about December 8, 2015, and at times prior thereto, the employer did not have the operators manual for the Toyota forklift. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- Jan 11, 2016
- Abate by
- Feb 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) On or before December 8, 2015, and at times prior thereto, there was no record/certification of training for the powered industrial truck operators. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 444130)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341106920.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.