JACKSONVILLE, FL —
OSHA Inspection: BEACHES WOODCRAFTS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BEACHES WOODCRAFTS, INC. in 14 DUTTON ISLAND ROAD, JACKSONVILLE, FL 32233 (NAICS 337110). OSHA activity number 341111318.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEACHES WOODCRAFTS, INC.
- Site address
- 14 DUTTON ISLAND ROAD
- City
- JACKSONVILLE
- State
- FL
- ZIP
- 32233
- Mailing
- 14 DUTTON ISLAND ROAD E., JACKSONVILLE, FL 32233
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 17
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 C01
- Issued
- Dec 22, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut: a. On December 10, 2015, in the shop, the Delta Rockwell 10-inch table saw did not have a guard, exposing employees to an amputation hazard.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.213 C02
- Issued
- Dec 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw of being thrown back on the operator: a. On December 10, 2015, in the shop, the Delta Rockwell 10-inch table saw did not have a spreader, exposing employees to the hazard of being struck by debris.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Dec 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Handfed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a. On December 10, 2015, in the shop, the Delta Rockwell 10-inch table saw did not have non kickback fingers, exposing employees to the hazard of being struck by debris.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H04
- Issued
- Dec 22, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.213(h)(4): Installation was not in such a manner that the front end of the unit was higher than the rear, so as to cause the cutting head to return gently to the starting position when released by the operator: a. On December 10, 2015, in the shop, the Black and Decker radial arm saw did not automatically return to the stop position.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.215 A02
- Issued
- Dec 22, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: a. On December 10, 2015, in the shop, the Dayton 8-inch grinder did not have the spindle end guard in place.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.215 B09
- Issued
- Dec 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. On December 10, 2015, in the shop, the tongue guard on the Dayton 8-inch grinder had a 1 inch opening, exposing employees to a struck by hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.36 C01
- Issued
- Dec 22, 2015
- Abate by
- Feb 29, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(c)(1): Each exit discharge did not lead directly outside or to a street, walkway, refuge area, public way, or open space with access to the outside: a. On December 10, 2015, the exit on the east side of the shop had a pond within 5 feet of the building which did not allow enough space for a safe evacuation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Beaches Woodcrafts, INC.
View Beaches Woodcrafts, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341111318.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.