LEVITTOWN, PA —
OSHA Inspection: BRISTOL ALUMINUM COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BRISTOL ALUMINUM COMPANY in 5514 EMILIE ROAD, LEVITTOWN, PA 19055 (NAICS 332323). OSHA activity number 341122497.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BRISTOL ALUMINUM COMPANY
- Site address
- 5514 EMILIE ROAD
- City
- LEVITTOWN
- State
- PA
- ZIP
- 19055
- Mailing
- 5514 EMILIE ROAD, LEVITTOWN, PA 19055
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332323
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Mar 18, 2016
- Abate by
- Jul 6, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) Production Workshop Area: On or about December 17, 2015, employees are maintaining production equipment with multiple sources of energy, but the employer had not yet developed a hazardous energy control program.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.215 A04
- Issued
- Mar 18, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) The Die Shop - On or about December 17, 2015, an employee used a Delta bench grinder that was not adjusted closely to the wheel with a maximum opening of one eighth inch.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.215 B09
- Issued
- Mar 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) The Die Shop: On or about December 17, 2015, an employee used a Delta bench grinder where the distance between the abrasive wheel periphery(s) and the adjustable tongue guard at the top exceeded one fourth inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Mar 18, 2016
- Abate by
- May 6, 2016
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) The Die Shop Work Area: On or about December 17, 2015, an employee used a Gorton Milling machine that had an unguarded pulley that was less than seven (7) feet from the floor.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.219 E01 I
- Issued
- Mar 18, 2016
- Abate by
- May 6, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) The Die Shop Work Area: On or about December 17, 2015, an employee used a Gorton Milling machine that had an unguarded horizontal belt that was less than seven (7) feet from the floor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Bristol Aluminum Company
View Bristol Aluminum Company's full OSHA safety record →
More inspections in this industry (NAICS 332323)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341122497.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.