Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNITED MASONRY CONTRACTORS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of UNITED MASONRY CONTRACTORS INC. in 714 LEE ST., DES PLAINES, IL 60016 (NAICS 238140). OSHA activity number 341123743.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch United Masonry Contractors INC. — free Get an email when a new federal OSHA severe-injury report for United Masonry Contractors INC. is published. One employer, no account, unsubscribe in one click.
Site address
714 LEE ST.
City
DES PLAINES
State
IL
ZIP
60016
Mailing
PO BOX 5248, WHEATON, IL 60189
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
10
Ownership type
A

6 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 2, 2016
Abate by
Mar 8, 2016
Penalty
Initial $2,800 · Current $1,600 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:      a)  Employees engaged in masonry work were not protected from falling, while working along the edge of the roof approximately 30 feet above the ground.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2800

1926.501 B04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 2, 2016
Abate by
Mar 8, 2016
Penalty
Initial $2,000 · Current $1,100 Reduced
29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels by personal fall arrest systems, covers or guardrail systems erected around such holes:       a)  Employees were not protected from the hazard of falling approximately 20 feet to the lower level while performing masonry work around unguarded skylights.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1100
  • — Z (S) $2000

1926.502 D08

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 2, 2016
Abate by
Mar 8, 2016
Penalty
Initial $2,000 · Current $1,100 Reduced
29 CFR 1926.502(d)(8): Horizontal lifelines were not designed, installed, and used under the supervision of a qualified person, as part of a complete personal fall arrest system, which maintained a safety factor of at least two:    a)  The employer did not ensure that the horizontal lifeline provided to employees as a part of a complete personal fall arrest system during masonry work was designed, installed and used under the supervision of a qualified person.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $2000

1926.502 D15

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 2, 2016
Abate by
Mar 8, 2016
Penalty
Initial $2,000 · Current $1,100 Reduced
29 CFR 1926.502(d)(15): Anchorage used for attachment for personal fall arrest equipment was not capable of supporting at least 5,000 pounds (22.2 kN) per employee attached nor was it designed, installed and used as follows: As part of a complete personal fall arrest system which maintains a safety factor of at least two; and under the supervision of a qualified person:    a)  The employer did not ensure that the anchorage used by employees as an attachment point for personal fall arrest system was capable of supporting at least 5,000 pound per employee attached to it.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $2000

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 2, 2016
Penalty
Initial $2,000 · Current $1,100 Reduced
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:      a)  Employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.    No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $2000

1926.502 D18

Other-than-serious 1 instance 1 exposed
Issued
Mar 2, 2016
Abate by
Mar 8, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(18): Personal fall arrest system components were used to hoist material:  a)  Employees engaged in masonry work were using lifelines that they were connected to for the purpose of hoisting building material to the roof.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341123743.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.