MCKINNEY, TX —
OSHA Inspection: ENCORE WIRE CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ENCORE WIRE CORPORATION in 1329 MILLWOOD ROAD, MCKINNEY, TX 75069 (NAICS 335929). OSHA activity number 341125789.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ENCORE WIRE CORPORATION
- Site address
- 1329 MILLWOOD ROAD
- City
- MCKINNEY
- State
- TX
- ZIP
- 75069
- Mailing
- 1329 MILLWOOD ROAD, MCKINNEY, TX 75069
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335929
- Employees
- 1359
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 II
- Issued
- May 17, 2016
- Abate by
- Jun 13, 2016
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): (a) Employer did not ensure energy control procedures for the Quiens Rigid Strander, clearly and specifically outline the scope and purpose of the procedures to control all hazardous energy. (b) Employer did not clearly and specifically outline the authorization of employees performing lockout tagout, referenced in Step 5 of procedures.
Recent events (3)
- — F (O) $4200
- — C (S) $7000
- — Z (S) $7000
1910.212 A01
- Issued
- May 17, 2016
- Abate by
- Jun 13, 2016
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Employer did not provide one or more methods of machine guarding on the Quiens Rigid Strander, to protect employees from hazards created by ingoing nip points and rotating parts.
Recent events (3)
- — F (O) $4200
- — C (S) $7000
- — Z (S) $7000
1904.29 B03
- Issued
- May 17, 2016
- Abate by
- May 27, 2016
- Penalty
- Initial $1,100 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and/or 301 Incident Report, or an equivalent form, within seven (7) calendar days of receiving information that a recordable injury or illness has occurred: (a) The employer did not record an injury that occurred on July 30, 2015 onto OSHA 300 Log within 7 calendar days; (b) The employer did not record an injury that occurred on August 06, 2015 onto OSHA 300 Log within 7 calendar days; (c) The employer did not record an injury that occurred on August 6, 2015 onto OSHA 300 Log within 7 calendar days; (d) The employer did not record an injury that occurred on August 10, 2015 onto OSHA 300 Log within 7 calendar days; (e) The employer did not record an injury that occurred on August 10, 2015 onto OSHA 300 Log within 7 calendar days; (f) The employer did not record an injury that occurred on August 10, 2015onto OSHA 300 Log within 7 calendar days; (g) The employer did not record an injury that occurred on August 17, 2015 onto OSHA 300 Log within 7 calendar days; (h) The employer did not record an injury that occurred on August 21, 2015 onto OSHA 300 Log within 7 calendar days; (i) The employer did not record an injury that occurred on August 21, 2015 onto OSHA 300 Log within 7 calendar days; j) The employer did not record an injury that occurred on August 31, 2015 with onto OSHA 300 Log within 7 calendar days; (k) The employer did not record an injury that occurred on September 14, 2015 onto OSHA 300 Log within 7 calendar days; (l) The employer did not record an injury that occurred on September 16, 2015 onto OSHA 300 Log within 7 calendar days; (m) The employer did not record an injury that occurred on September 21, 2015 onto OSHA 300 Log within 7 calendar days; (n) The employer did not record an injury that occurred on October 02, 2015 onto OSHA 300 Log within 7 calendar days; (o) The employer did not record an injury that occurred on October 09, 2015 onto OSHA 300 Log within 7 calendar days; (p) The employer did not record an injury that occurred on October 13, 2015 onto OSHA 300 Log within 7 calendar days; (q) The employer did not record an injury that occurred on October 15, 2015 onto OSHA 300 Log within 7 calendar days; (r) The employer did not record an injury that occurred on November 09, 2015 onto OSHA 300 Log within 7 calendar days; (s) The employer did not record an injury that occurred on November 24, 2015 onto OSHA 300 Log within 7 calendar days; (t) The employer did not record an injury that occurred on December 05, 2015 onto OSHA 300 Log within 7 calendar days.
Recent events (3)
- — F (O) $0
- — C (O) $1100
- — Z (O) $1100
More inspections at Encore Wire Corporation
View Encore Wire Corporation's full OSHA safety record →
More inspections in this industry (NAICS 335929)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341125789.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.