BROOKLYN, NY —
OSHA Inspection: TAHOE DEVELOPMENT GROUP, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TAHOE DEVELOPMENT GROUP, LLC in 880 METROPOLITAN AVE., BROOKLYN, NY 11211 (NAICS 236117). OSHA activity number 341132207.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAHOE DEVELOPMENT GROUP, LLC
- Site address
- 880 METROPOLITAN AVE.
- City
- BROOKLYN
- State
- NY
- ZIP
- 11211
- Mailing
- 82-17 153RD ST., HOWARD BEACH, NY 11414
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236117
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 G01 VII
- Issued
- Jan 25, 2016
- Abate by
- Jan 29, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite, 880 Metropolitan Ave. Brooklyn NY - Employee was applying Poly-Bond on the exterior of a 4 story residential building while working from a fabricated frame scaffold. Employee was working from areas of the scaffold, approximately 12ft above the ground without a means of fall protection; on or about 12/19/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.501 B04 II
- Issued
- Jan 25, 2016
- Abate by
- Jan 29, 2016
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes (including skylights) by covers: a) Worksite, 880 Metropolitan Ave. Brooklyn NY - Employees were walking and working over 4in holes in the interior concrete floor of the worksite; on or about 12/19/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $1200
1910.1200 E01
- Issued
- Jan 25, 2016
- Abate by
- Mar 11, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met (Construction Reference: 1926.59): a) Worksite, 880 Metropolitan Ave. Brooklyn NY - Employees use materials such as, but not limited to, Poly-Bond. A written hazard communication program was not in place; on, or about, 12/19/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. ABATEMENT NOTE: The written Hazard Communication Program must include descriptions of how the following program elements, required by this regulation, will be developed, implemented, and conveyed to the employer's employee(s) who are exposed to hazardous materials: a. Labeling and other forms or warning: Labels shall include at least the identity of the hazardous chemical(s), the appropriate hazard warnings, the target organs, and the name and address of the chemical manufacturer, importer or other responsible party; b. A list or inventory of all hazardous materials known to be present in the workplace must be compiled and be maintained as part of the employer's written Hazard Communication Program; c. Material Safety Data Sheets (MSDSs) for all materials used by employee(s) in the workplace must be maintained and readily available all employee(s) on all shifts. d. The employer's Hazardous Materials Information and Training Program must be based upon the employer's written Hazard Communication Program. The training for employee(s) must include at least: Methods and observation that may be used to detect the presence or release of hazardous chemicals in the work area. The physical and health hazards of the chemicals in the work area. The measures employee(s) can take to protect themselves, such as, specific procedures, appropriate work practices, emergency procedures, and personal protective equipment to be used. The details of the employer's Hazard Communication Program including an explanation of the labeling systems used, Material Safety Data Sheets and how employees can obtain and use the appropriate hazard information; e. Methods used to inform employees of the hazards associated with non routine tasks must also be addressed in the employer's written program; and f. The employer's written Hazard Communication Program must be made available upon request. For Multi Employer Work places, the employer's Written Hazard Communication Program must also specifically address how: a. Material Safety Data Sheets for each hazardous material on the job site will be provided to other employers in the event the other employer's employee(s) may be exposed to these materials. b. The methods the employer will use to inform other employer(s) of any precautionary measures that need to be taken to protect employee(s) during normal operating conditions and in foreseeable emergencies. c. The methods the employer will use to inform the other employer(s) of the labeling system used in the workplace.
Recent events (1)
- — Z (O) $0
1910.1200 G08
- Issued
- Jan 25, 2016
- Abate by
- Mar 11, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that material safety data sheets were readily accessible to the employees in their work area during each work shift: a) Worksite, 880 Metropolitan Ave. Brooklyn NY - Employees use materials such as, but not limited to, Poly-Bond. Safety data sheets were not available; on, or about, 12/19/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.1200 H01
- Issued
- Jan 25, 2016
- Abate by
- Mar 11, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Worksite, 880 Metropolitan Ave. Brooklyn NY -Employees use materials such as, but not limited to, Poly-Bond. A training program was not in place; on or about 12/19/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
More inspections at Tahoe Development Group, LLC
View Tahoe Development Group, LLC's full OSHA safety record →
More inspections in this industry (NAICS 236117)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341132207.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.