SAN ANTONIO, TX —
OSHA Inspection: KCM CABINETS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of KCM CABINETS, INC. in 5748 GREY ROCK DR., SAN ANTONIO, TX 78228 (NAICS 337110). OSHA activity number 341136620.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KCM CABINETS, INC.
- Site address
- 5748 GREY ROCK DR.
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78228
- Mailing
- 5748 GREY ROCK DR., SAN ANTONIO, TX 78228
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 27
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Mar 15, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $3,500 · Current $2,012 Reduced
E101M102
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: Manufacturing Area of Facility: On or about December 22, 2016, employees were exposed to explosion, deflagration and/or fire hazards as a result of the accumulation of combustible dust on horizontal and vertical surfaces, where electrical junction boxes, ducts, and structural members of the facility were covered by combustible saw dust measuring from approximately 1/16 inch to 1-3/4 inches.
Recent events (2)
- — I (S) $2012
- — Z (S) $3500
1910.22 B01
- Issued
- Mar 15, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard: Warehouse, Laminate application area: On or about December 22, 2015 employees were exposed to tripping hazards while stepping over various electrical cords that was laid on floors in employee work areas.
Recent events (2)
- — I (O) $0
- — Z (S) $2100
1910.106 E02 III
- Issued
- Mar 15, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $2,800 · Current $1,610 Reduced
General-duty citation text
29 CFR 1910.106(e)(2)(iii): Drainage or other means to control spills was not provided in areas where flammable or combustible liquids were transferred from one tank or container to another container: Warehouse, west side: On or about December 22, 2015, employee(s) were exposed to chemical hazards and fire hazards while transferring Lacquer Thinner 27 (Toleuene, 25-50%), from a 55-gallon container without a means to control and contain flammable liquid spills in the work area.
Recent events (2)
- — I (S) $1610
- — Z (S) $2800
1910.132 A
- Issued
- Mar 15, 2016
- Abate by
- Mar 28, 2016
- Penalty
- Initial $2,800 · Current $1,610 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: Fabrication Area: On or about December 22, 2015, employee(s) who perform cabinet laminate tasks were exposed to chemical hazards from the spray application of an adhesive called Wilsonart 800 series, which contained skin irritants and permeators, including Acetone (20-45%) and Toluene (1-15%), without the use of personal protective equipment, such as chemical resistant gloves.
Recent events (2)
- — I (S) $1610
- — Z (S) $2800
1910.1200 H01
- Issued
- Mar 15, 2016
- Abate by
- Apr 7, 2016
- Penalty
- Initial $4,900 · Current $2,818 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: Manufacturing Facility: On or about December 22,2015, and times prior thereto, employees who were exposed to hazards from the use of chemicals such as, but not limited to Wilsonart 800 adhesive series (Acetone 20-45%, Toluene 1-15%) and Lacquer Thinner 27 (Toluene 25-50%) were not informed by the company of the associated hazards of these chemicals, symptoms of exposure, and precautionary measures.
Recent events (2)
- — I (S) $2818
- — Z (S) $4900
More inspections in this industry (NAICS 337110)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341136620.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.