Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: INKO CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of INKO CORP. in 1655 MCGOVERN ST., HIGHLAND PARK, IL 60035 (NAICS 238160). OSHA activity number 341138618.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Inko Corp. — free Get an email when a new federal OSHA severe-injury report for Inko Corp. is published. One employer, no account, unsubscribe in one click.
Establishment
INKO CORP.
Site address
1655 MCGOVERN ST.
City
HIGHLAND PARK
State
IL
ZIP
60035
Mailing
314 N. EDGEWOOD AVE., WOOD DALE, IL 60191
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 1, 2016
Abate by
Mar 7, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):      a)  Employees engaged in gutter installation work were not protected from fall hazards while working at an elevation of approximately 25 feet above the ground.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — A (S) $2800
  • — I (S) $2000
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 1, 2016
Abate by
Mar 7, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:      a)  Ladders used by employees to gain access to the working surface did not have its side rails extended at least 3 feet above the deck.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • — A (S) $2000
  • — I (S) $1000
  • — Z (S) $2000

1926.1053 B05 I

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 1, 2016
Abate by
Mar 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):      a)  Employees were exposed to fall hazards while working from an extension ladder that was not set up at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • — A (S) $0
  • — I (S) $0
  • — Z (S) $0

View Inko Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341138618.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.