EASTON, PA —
OSHA Inspection: ACCU MACHINING CENTER, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ACCU MACHINING CENTER, INC. in 3750 NICHOLAS STREET, EASTON, PA 18045 (NAICS 332710). OSHA activity number 341143949.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACCU MACHINING CENTER, INC.
- Site address
- 3750 NICHOLAS STREET
- City
- EASTON
- State
- PA
- ZIP
- 18045
- Mailing
- PO BOX 3220, EASTON, PA 18043
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C02 II
- Issued
- Nov 21, 2016
- Abate by
- Jan 31, 2017
- Penalty
- Initial $1,817 · Current $1,272 Reduced
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: a): Welding Area: Employees were wearing a 3M half face elastomeric respirator on a voluntary basis while grinding or using Capital Weld Cleaning Solution and the facility did not develop a program to determine if employees were medically able to use a respirator, on or about October 20, 2016. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1271.9
- — Z (S) $1817
1910.157 G01
- Issued
- Nov 21, 2016
- Abate by
- Jan 31, 2017
- Penalty
- Initial $1,817 · Current $1,272 Reduced
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) Facility-wide : Employees were not provided training to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting, on or about October 20, 2016. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1271.9
- — Z (S) $1817
1910.178 L04 III
- Issued
- Nov 21, 2016
- Abate by
- Jan 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) First Floor Production Area: Employees operating the Hyster 40 forklift were not evaluated for their performance and skill within the past three years, on or about October 20, 2016. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1026 D01
- Issued
- Nov 21, 2016
- Penalty
- Initial $0 · Current $0
0689
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): a) Welding area: Welders were TIG welding on stainless steel and the employer did not determine the employee's exposure to hexavalent chromium, on or about October 20, 2016. No abatement certification or documentation required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Accu Machining Center, INC.
View Accu Machining Center, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341143949.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.